Product supplierRound White Bistro Table with Two Black Swivel Bucket Chairs, 25 mm engineered stone-composite panel with white sealed finish and rounded edge
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Finished Seat Cushion Thickness | 90 mm | |
|---|---|---|
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Table static load capacity | 50 kg | |
|---|---|---|
| Table static vertical load | 50 kg | |
| Table distributed tabletop load | 30 kg per square meter | |
| Per-chair static seat load | 120 kg | |
| Recommended occupant weight | 100 kg per chair | |
| Swivel rotation rating | 20,000 cycles | |
| Table stability lateral load | 15 kg at 750 mm edge height | |
| Floor glide loading | 30 kg per contact point | |
| Wobble allowance on level floor | 2 mm | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop | 25 mm engineered stone-composite panel with white sealed finish and rounded edge | |
|---|---|---|
| Table edge | Rounded polymer or resin-sealed edge bonded to the composite core | |
| Pedestal column | 76 mm chrome-plated steel tube with welded top and bottom mountings | |
| Table base | Four-prong chrome-plated steel fabrication with welded center hub | |
| Floor contacts | Four replaceable black polymer non-slip glides, one on each table prong | |
| Chair shell | One-piece molded black polypropylene bucket seat, back and integrated arms |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Swivel stem diameter | 50 mm | |
|---|---|---|
| 360-degree chair swivel | Ball-bearing steel stem rotates 360 degrees without a height or tilt adjustment | |
| Two-person dining layout | 700 mm round top provides two primary place positions opposite one another | |
| Integrated arm support | Molded arms rise 220 mm above the seat and wrap into the backrest |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Small breakfast nook | Two-person set for apartments or kitchen corners where 700 mm footprint saves space. | |
|---|---|---|
| Cafe or bistro seating | Suitable for low-density hospitality areas using paired chairs around a compact pedestal table. |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | Procurement reference for wooden furniture dimensions, tolerances and inspection; applies to the tabletop substrate if wood-based. | |
|---|---|---|
| GB/T 3325-2017 | Procurement reference for metal furniture general technical requirements; applies to steel pedestal and chair legs. | |
| GB 18584-2001 | Indoor wooden furniture material pollution-control reference for formaldehyde emission acceptance of engineered panels. | |
| GB/T 10357.6-2013 | Furniture mechanical test reference for table stability and structural performance acceptance. | |
| GB/T 10357.3-2013 | Furniture mechanical test reference for chair strength and durability acceptance. |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: Procurement reference for wooden furniture dimensions, tolerances and inspection; applies to the tabletop substrate if wood-based.; 2. GB/T 3325-2017: Procurement reference for metal furniture general technical requirements; applies to steel pedestal and chair legs.; 3. GB 18584-2001: Indoor wooden furniture material pollution-control reference for formaldehyde emission acceptance of engineered panels.; 4. GB/T 10357.6-2013: Furniture mechanical test reference for table stability and structural performance acceptance.; 5. GB/T 10357.3-2013: Furniture mechanical test reference for chair strength and durability acceptance.; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool