纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	680 × 700 × 1280 mm
Arm pad size	250 x 90 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user weight	150 kg
Seat static-load acceptance	200 kg
Backrest backward static load	136 kg
Gas-lift vertical stroke	100 mm
Backrest recline angle	135 degrees
Seat sliding travel	50 mm
Footrest extension travel	180 mm
Durability target	120,000 cycles
Caster rolling durability	100,000 cycles
Single-user capacity	1 person

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Backrest upholstery	Pink polyester mesh with woven open-cell structure over a contoured plastic back frame
Seat upholstery	Pink engineered mesh over molded foam cushion and load-bearing seat shell
Seat cushion foam	60 mm molded polyurethane foam, 45 kg/m3 density, 40 percent rebound target
Mesh fabric thickness	1.8 mm woven mesh with 30,000-cycle Martindale procurement target
Headrest	Pink mesh-covered cushion with light-gray plastic edge housing
Arm pads	Black molded polyurethane pads on height-adjustable support stems
Arm and back frame	Light-gray glass-fiber-reinforced polypropylene structural frame with side braces
Internal back frame	5 mm reinforced polymer rib frame with steel tension strips
Mechanism	Black steel multi-function synchro-tilt mechanism with three control levers
Gas lift	50 mm diameter class-4 steel gas lift with black telescopic sleeve
Five-star base	Polished die-cast aluminum-alloy base with 3.0 mm wall section target
Footrest frame	Light-gray polymer cradle with pink mesh-covered padded panel and steel slide rails

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Swivel function	360-degree continuous swivel around the central gas-lift column
Height adjustment	Pneumatic seat-height lift with 100 mm travel controlled by the right-side lever
Backrest recline	Synchro tilt to 135 degrees with multi-position lock and weighted tension control
Seat-depth adjustment	50 mm horizontal seat-slider adjustment for thigh-depth fitting
Headrest adjustment	Curved headrest with 60 mm height adjustment and 20-degree angle tilt
Armrest adjustment	Height-adjustable armrests with 80 mm vertical travel and 2D pad positioning
Footrest operation	Fold-out calf/foot panel with 180 mm extension for reclined resting
Lumbar support	Contoured elastic lumbar zone formed by tensioned mesh and framed back curve
Tilt tension	Knob-controlled spring tension allowing resistance setting for user weight
Mobility	Five twin-wheel swivel casters for movement on hard floors or low-pile carpet
Reclined overall depth	1180 mm
Recline Angle / Lock Reference	125° with 3suggested lock positions

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office	Suitable for daily computer and desk work at 1800 mm executive workstations due to high-back and head support
Open-plan workstation	Fits users needing recline and lumbar support during long shifts in task-focused office layouts
Home office	Appropriate in a private study where the footrest supports short rest breaks between work sessions
Manager meeting room	Can serve as a premium visitor or manager chair in spaces requiring mobility and swivel access
24-hour knowledge work	Recommended for programmers, analysts, and administrators using seated support for 6 or more hours daily
Hard-floor workspace	Use on wood, tile, or commercial vinyl with the specified 60 mm twin-wheel casters and protective floor mat
Recline-rest configuration	Useful where a short reclined pause is required without converting the chair into a bed or sofa
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1:2020	Office furniture seating dimensions and safety reference for task-chair geometric requirements
EN 1335-2:2018	Safety, strength, and durability reference for office task chairs
EN 1335-3:2020	Test-method reference for structural and mechanical verification
EN 1022:2018	Domestic and contract seating stability reference for tipping assessment

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1-2017	Office chairs standard covering back strength, base, swivel, tilt, fatigue, and caster tests
BIFMA X5.1 static load tests	Procurement acceptance should verify 102 kg back-rest and 200 kg seat static-load requirements where applicable

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable only as a workmanship reference for any wood-composite structural parts
GB/T 10357.2-2013	Furniture mechanical and surface test reference for chair seating and back structural loading
GB/T 10357.3-2013	Chair strength and durability test reference for repeated seating and back loading
GB 17927-2011	Upholstered furniture safety reference for ignition resistance when fabric and foam are used

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable only as a workmanship reference for any wood-composite structural parts；
2. GB/T 10357.2-2013：Furniture mechanical and surface test reference for chair seating and back structural loading；
3. GB/T 10357.3-2013：Chair strength and durability test reference for repeated seating and back loading；
4. GB 17927-2011：Upholstered furniture safety reference for ignition resistance when fabric and foam are used；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OC-MESH-FR-PG-01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OC-MESH-FR-PG-01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OC-MESH-FR-PG-01打开导出工具

页面快速操作

发布采购询价

产品描述

The Ergonomic Mesh Executive Chair with Integrated Footrest presents a high-back office silhouette finished in pink engineered mesh with a light-gray structural frame, black PU arm pads, and a polished aluminum-alloy five-star base. Its contoured back, cushioned headrest, layered seat, and fold-out footrest create a cohesive executive look while retaining the open appearance associated with breathable task seating. The swiveling seat and twin-wheel nylon casters support easy movement within a workstation or meeting area. Construction combines a light-gray glass-fiber-reinforced polypropylene arm and back frame with side braces, a reinforced polymer rib frame and steel tension strips inside the back, and a black steel multi-function synchro-tilt mechanism. The backrest uses pink polyester mesh with a woven open-cell structure, while the seat places pink engineered mesh over a molded polyurethane foam cushion and load-bearing shell. A steel gas lift connects the seat to the polished base, and the arm pads are black molded polyurethane on adjustable support stems. The chair is built for extended seated work and short rest breaks. It offers 360-degree continuous swivel, pneumatic seat-height adjustment, a 135-degree synchro-tilt backrest with multi-position lock and weighted tension control, and horizontal seat-depth adjustment. The curved headrest adjusts in height and angle, while the armrests provide height movement and 2D pad positioning. When reclining, the fold-out calf and foot panel extends to support the legs. A defined lumbar zone and high-back shape add neck, back, and upper-body support for long computer-based tasks. This model is suitable for executive offices, open-plan workstations, private home studies, manager meeting rooms, and hard-floor workspaces when used with the specified casters and a protective floor mat. It is particularly relevant for programmers, analysts, administrators, and others whose roles involve six or more hours of daily seated work. Procurement teams should note that the chair is unbranded under model OC-MESH-FR-PG-01 and is supplied as one set in two cartons, with a packaged gross weight of 23 kg per set and a reference assembly time of 40 minutes. Planning should allow space for assembly, carton handling, and floor protection, and buyers should review the listed weight, adjustment, packaging, and loading information against project requirements before ordering.

Ergonomic Mesh Executive Chair with Integrated Footrest Specifications

供应商与现货