Product supplierErgonomic Mesh Executive Chair with Integrated Footrest, Pink polyester mesh with woven open-cell structure over a contoured plastic back frame
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 680 × 700 × 1280 mm | |
|---|---|---|
| Arm pad size | 250 x 90 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight | 150 kg | |
|---|---|---|
| Seat static-load acceptance | 200 kg | |
| Backrest backward static load | 136 kg | |
| Gas-lift vertical stroke | 100 mm | |
| Backrest recline angle | 135 degrees | |
| Seat sliding travel | 50 mm | |
| Footrest extension travel | 180 mm | |
| Durability target | 120,000 cycles | |
| Caster rolling durability | 100,000 cycles | |
| Single-user capacity | 1 person |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Backrest upholstery | Pink polyester mesh with woven open-cell structure over a contoured plastic back frame | |
|---|---|---|
| Seat upholstery | Pink engineered mesh over molded foam cushion and load-bearing seat shell | |
| Seat cushion foam | 60 mm molded polyurethane foam, 45 kg/m3 density, 40 percent rebound target | |
| Mesh fabric thickness | 1.8 mm woven mesh with 30,000-cycle Martindale procurement target | |
| Headrest | Pink mesh-covered cushion with light-gray plastic edge housing | |
| Arm pads | Black molded polyurethane pads on height-adjustable support stems | |
| Arm and back frame | Light-gray glass-fiber-reinforced polypropylene structural frame with side braces | |
| Internal back frame | 5 mm reinforced polymer rib frame with steel tension strips | |
| Mechanism | Black steel multi-function synchro-tilt mechanism with three control levers | |
| Gas lift | 50 mm diameter class-4 steel gas lift with black telescopic sleeve | |
| Five-star base | Polished die-cast aluminum-alloy base with 3.0 mm wall section target | |
| Footrest frame | Light-gray polymer cradle with pink mesh-covered padded panel and steel slide rails |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Swivel function | 360-degree continuous swivel around the central gas-lift column | |
|---|---|---|
| Height adjustment | Pneumatic seat-height lift with 100 mm travel controlled by the right-side lever | |
| Backrest recline | Synchro tilt to 135 degrees with multi-position lock and weighted tension control | |
| Seat-depth adjustment | 50 mm horizontal seat-slider adjustment for thigh-depth fitting | |
| Headrest adjustment | Curved headrest with 60 mm height adjustment and 20-degree angle tilt | |
| Armrest adjustment | Height-adjustable armrests with 80 mm vertical travel and 2D pad positioning | |
| Footrest operation | Fold-out calf/foot panel with 180 mm extension for reclined resting | |
| Lumbar support | Contoured elastic lumbar zone formed by tensioned mesh and framed back curve | |
| Tilt tension | Knob-controlled spring tension allowing resistance setting for user weight | |
| Mobility | Five twin-wheel swivel casters for movement on hard floors or low-pile carpet | |
| Reclined overall depth | 1180 mm | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office | Suitable for daily computer and desk work at 1800 mm executive workstations due to high-back and head support | |
|---|---|---|
| Open-plan workstation | Fits users needing recline and lumbar support during long shifts in task-focused office layouts | |
| Home office | Appropriate in a private study where the footrest supports short rest breaks between work sessions | |
| Manager meeting room | Can serve as a premium visitor or manager chair in spaces requiring mobility and swivel access | |
| 24-hour knowledge work | Recommended for programmers, analysts, and administrators using seated support for 6 or more hours daily | |
| Hard-floor workspace | Use on wood, tile, or commercial vinyl with the specified 60 mm twin-wheel casters and protective floor mat | |
| Recline-rest configuration | Useful where a short reclined pause is required without converting the chair into a bed or sofa | |
| Recommended Matching Desk Size | 2.4 m executive desk |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1335-1:2020 | Office furniture seating dimensions and safety reference for task-chair geometric requirements | |
|---|---|---|
| EN 1335-2:2018 | Safety, strength, and durability reference for office task chairs | |
| EN 1335-3:2020 | Test-method reference for structural and mechanical verification | |
| EN 1022:2018 | Domestic and contract seating stability reference for tipping assessment |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 | Office chairs standard covering back strength, base, swivel, tilt, fatigue, and caster tests | |
|---|---|---|
| BIFMA X5.1 static load tests | Procurement acceptance should verify 102 kg back-rest and 200 kg seat static-load requirements where applicable |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable only as a workmanship reference for any wood-composite structural parts | |
|---|---|---|
| GB/T 10357.2-2013 | Furniture mechanical and surface test reference for chair seating and back structural loading | |
| GB/T 10357.3-2013 | Chair strength and durability test reference for repeated seating and back loading | |
| GB 17927-2011 | Upholstered furniture safety reference for ignition resistance when fabric and foam are used |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable only as a workmanship reference for any wood-composite structural parts; 2. GB/T 10357.2-2013: Furniture mechanical and surface test reference for chair seating and back structural loading; 3. GB/T 10357.3-2013: Chair strength and durability test reference for repeated seating and back loading; 4. GB 17927-2011: Upholstered furniture safety reference for ignition resistance when fabric and foam are used; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool