| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall footprint | 2304 x 2060 x 1100 mm | |
|---|---|---|
| Mattress interface | 1930 x 2030 mm | |
| Headboard overall size | 2060 x 240 x 1100 mm | |
| Upper headboard cushion size | 980 x 220 x 120 mm per cushion, 2 pieces | |
| Lower headboard panel size | 980 x 300 x 90 mm per panel, 2 pieces | |
| Side rail size | 2130 x 180 x 300 mm each, 2 pieces | |
| Foot rail size | 2060 x 180 x 300 mm | |
| Platform support height | 320 mm from floor to top of slat deck | |
| Sleeping surface height | 520 mm including a 200 mm mattress | |
| Under-bed clearance | 120 mm high x 1700 mm wide under the central deck | |
| Leg and base footprint | 25 x 25 mm square metal tube with 120 mm legs | |
| Slat support zone | 1930 x 2000 mm | |
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Static load capacity | 363 kg | |
|---|---|---|
| Recommended mattress weight | 55 kg | |
| Occupant capacity | 2 adults | |
| Bed frame net weight | 58 kg | |
| Slat count | 14 slats | |
| Individual slat load | 35 kg static per slat | |
| Center support legs | 3 legs | |
| Fabric seam spacing | 80 mm maximum seam pitch | |
| Mattress thickness suitability | 200 mm | |
| Warranty duration | 24 months |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard substrate | Engineered-wood or plywood panel, 18 mm nominal, fully wrapped and padded | |
|---|---|---|
| Headboard cushion padding | 38 kg/m3 polyurethane foam, 120 mm thick on upper cushions | |
| Rail padding | High-resilience polyurethane foam, 30 mm thick, bonded to the rail frame | |
| Upholstery fabric | Mustard polyester woven fabric, 320 g/m2 nominal | |
| Mattress visible in photo | Quilted light-beige knitted fabric over foam or hybrid mattress core | |
| Slat system | Bent laminated beech or birch wood slats, 55 x 12 mm nominal | |
| Center beam | Rectangular engineered-wood rail, 60 x 40 mm nominal, with three support feet | |
| Legs and perimeter base | Dark bronze powder-coated square steel tube, 25 x 25 x 1.2 mm nominal | |
| Corner blocks | 18 mm plywood or hardwood corner blocks with M8 connector hardware | |
| Fasteners | M8 x 80 mm barrel bolts and cam connectors, 16 sets minimum | |
| Under-bed shadow panel | Black non-woven fabric or dark recessed base panel | |
| Edge stitching | Polyester sewing thread with 3 stitches per 10 mm |
Adjustment / rotation / tilt / mobility / storage features
| Platform support | Wood slat deck supports the mattress directly and removes the need for a box spring | |
|---|---|---|
| Center load distribution | One longitudinal beam and three floor legs divide the mattress area into reinforced support zones | |
| Headboard cushion layout | Two upper loose padded cushions and two fixed lower padded panels form a four-section backrest | |
| Rail retention | Bolt-on side and foot rails connect to the headboard and corner posts with knock-down hardware | |
| Floor contact | Four corner metal legs plus three center support legs transfer loads directly to the floor | |
| Under-bed access | 120 mm open clearance permits robot vacuum access and limited under-bed cleaning | |
| Mattress retention | Upholstered 300 mm rails surround the mattress and limit lateral movement | |
| Assembly method | Two-person bolt-together assembly using included Allen key and hardware kit | |
| Storage configuration | No drawers, gas-lift storage compartment or hydraulic mechanism is present | |
| Room placement | Headboard designed for wall placement with three open mattress-access sides | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Primary bedroom | Suits a king or super-king residential bedroom where a low upholstered frame and soft backrest are required | |
|---|---|---|
| Boutique hotel guest room | Fits contemporary hotel rooms seeking a warm mustard accent without built-in case goods | |
| Apartment furnishing project | Suitable for turn-key residential packages using flat-pack transport and two-person on-site assembly | |
| Showroom or model home | Appropriate for modern bedroom displays where the four-panel padded headboard is a visual focal point | |
| Bedroom with robot vacuum | 120 mm under-bed clearance supports routine floor-cleaning access | |
| Low-profile mattress styling | Pairs with a 200 mm mattress for a clean tailored sleeping surface height of 520 mm | |
| Neutral-wall interiors | Mustard upholstery provides a single warm color element against gray, white or beige walls |
EU Market Access Requirements* EN Standards
| Domestic bedding dimensions | EN 1334:1996 | |
|---|---|---|
| Furniture strength and durability | EN 1725:1998 | |
| Formaldehyde panels | EN 312:2010 |
Standards applicable to China-market projects
| Bed dimensional reference | GB/T 3328 | |
|---|---|---|
| Wood-based panels | GB 18580 | |
| Upholstered furniture safety | GB 28007 | |
| Furniture mechanical testing | GB/T 10357.6 |
This product must meet the following technical requirements: 1. Bed dimensional reference: GB/T 3328; 2. Wood-based panels: GB 18580; 3. Upholstered furniture safety: GB 28007; 4. Furniture mechanical testing: GB/T 10357.6; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
