| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall bed dimensions | 1980 x 2220 x 1050 mm | |
|---|---|---|
| Side Rail Thickness | 40 mm | |
| Slat Spacing | 80 mm | |
| Center Support Leg Count | Recommended 6legs |
Net weight / load capacity / users / durability
| Net weight | 72 kg | |
|---|---|---|
| Recommended mattress weight | 55 kg | |
| Static bed-frame load | 350 kg | |
| Slat system distributed load | 180 kg | |
| Occupant capacity | 2 adults | |
| Recommended mattress thickness | 260 mm | |
| Hardware cycle target | 10,000 assembly-side cycles | |
| Color options represented | 1 charcoal finish visible | |
| Bed Static Load Reference | 400 kg | |
| Per-slat Load Reference | 60 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Headboard upholstery | Charcoal woven textile-look fabric over soft padding | |
|---|---|---|
| Side and foot rails | Upholstered engineered-wood frame with matching charcoal outer layer | |
| Head cushion construction | Two independently shaped padded cushions with recessed diagonal seam detail | |
| Internal support board | Plywood or engineered-wood bed frame at 25 mm thickness | |
| Slat system | Flexible timber or composite slats on a central support rail at 28 mm slat width | |
| Support legs | Four slim silver-finish metal legs at 32 mm upper diameter | |
| Rail padding | 15 mm polyurethane padding under upholstery on side and foot rails | |
| Headboard inner filling | 35 kg/m3 polyurethane foam with fiber topping at 80 mm thickness | |
| Joint hardware | Carbon-steel bolts, barrel nuts, and corner brackets with black oxide or zinc plating | |
| Mattress contact layer | Breathable slatted support surface without solid board | |
| Surface abrasion target | 30,000 Martindale cycles for residential upholstery | |
| Seam construction | Reinforced sewn or tucked cushion edges with 8 stitches per 100 mm |
Adjustment / rotation / tilt / mobility / storage features
| Sleeping configuration | Two-adult queen-size platform designed for an 1800 x 2000 mm mattress | |
|---|---|---|
| Head support | Two padded back cushions provide upright reading support across the full 1980 mm width | |
| Mattress retention | Upholstered side and foot rails contain the mattress on the internal platform | |
| Under-bed access | 120 mm clearance permits robotic vacuum access and limited under-bed air circulation | |
| Assembly method | Knock-down bolted assembly connects headboard, side rails, foot rail, slats, and legs | |
| Support layout | Four corner legs plus a central longitudinal support beam carry the slat system | |
| Floor protection | Small floor-contact feet on slim metal legs reduce concentrated loading | |
| Placement requirement | Headboard is intended for wall placement with 50 mm rear clearance | |
| Storage provision | No drawers or lift-up storage mechanism are visible | |
| Maintenance access | Removable mattress allows access to slats and central support without disassembling outer rails | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Headboard carton dimensions | 2050 x 1120 x 220 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2300× 900× 450 mm/carton in 4 cartons | |
| Reference Packaged Gross Weight | 130 kg/set | |
| Reference Packaging Volume | 0.9 m³/set |
Recommended spaces / users / usage modes
| Main bedroom | Suits a queen-size bedroom for two adults seeking a soft modern upholstered headboard | |
|---|---|---|
| Guest suite | Fits serviced apartments or guest rooms requiring hotel-like comfort and restrained charcoal styling | |
| Contemporary residential interior | Pairs with concrete, white, gray, wood, or monochrome palettes seen in the room image | |
| Reading-in-bed setup | Padded two-cushion headboard supports upright reading or tablet use with bed pillows | |
| Compact luxury bedroom | Low 420 mm foot rail reduces visual mass while preserving a substantial 1050 mm headboard | |
| Bedding coordination | Works with white, light gray, charcoal, or textured textiles and a 240 to 260 mm mattress | |
| Flooring compatibility | Suitable for low-pile carpet, rug, wood-look, or hard floors with protective feet |
EU Market Access Requirements* EN Standards
| Furniture safety suggestion | EN 1725 for domestic bed safety, strength, and durability |
|---|
Standards applicable to China-market projects
| Formaldehyde emission suggestion | GB/T 39600 E1 limit for engineered-wood components | |
|---|---|---|
| Upholstered furniture safety suggestion | GB/T 33241 for domestic furniture with upholstered soft surfaces | |
| Furniture mechanical test suggestion | GB/T 10357.6 for bed strength and stability test methods |
This product must meet the following technical requirements: 1. Formaldehyde emission suggestion: GB/T 39600 E1 limit for engineered-wood components; 2. Upholstered furniture safety suggestion: GB/T 33241 for domestic furniture with upholstered soft surfaces; 3. Furniture mechanical test suggestion: GB/T 10357.6 for bed strength and stability test methods; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
