Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	579 × 600 × 880 mm
Seat width	409 mm
Seat depth	386 mm
Seat height	445 mm
Backrest height	330 mm
Leg tube diameter	19 mm
Floor contact span	500 mm
Seat front edge thickness	70 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended static load capacity	136 kg
Net weight per chair	7 kg
Upholstery abrasion resistance	50000 cycles
Seat foam density	45 kg/m³
Foam rebound rate	60%
Backrest static load rating	76 kg
Warranty period	1 year
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Upholstery	0.8mm thick tan PU faux leather, 75% PVC / 5% cotton / 20% polyester backing
Seat cushion fill	45kg/m³ high-density polyurethane foam, 50mm thick pad
Backrest fill	35kg/m³ polyurethane foam, 30mm thick contoured pad
Inner frame	12mm thick plywood seat and back support panel
Support springs	38mm gauge sinuous springs under seat cushion
Legs	19mm diameter black powder-coated steel tubing, splayed tapered design
Floor protection pads	5mm thick anti-scratch rubber pads on each leg base
Seam construction	6 stitches per 30mm edge stitching on upholstery seams
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating function	Contoured one-piece seat and back for upright table-side dining support
Storage design	Armless profile allows full tuck under standard 750mm high dining tables
Leg stability	Four-point splayed leg layout with 500mm footprint for anti-tip stability
Floor protection	Rubber leg pads prevent floor scratches and reduce movement noise
Cleaning feature	Smooth faux leather surface allows wipe-clean maintenance with damp cloth
Assembly requirement	Legs attach to pre-installed seat frame with included hardware and tool
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining room	Suitable for standard 750mm height dining tables, tucks fully under to save space
Restaurant/cafe seating	Wipe-clean faux leather and durable metal construction suit high-traffic commercial dining areas
Home office side chair	Slim armless form works as a desk side chair for occasional work use
Vanity/makeup chair	Compact footprint fits vanity tables, contoured seat supports short-duration grooming use
Small apartment dining	Lightweight stackable (non-locking) form saves storage space when not in use
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Furniture - Strength, durability and safety for domestic seating
EN 1022:2018	Furniture - Seating - Determination of stability

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to plywood inner frame components
GB/T 16799-2008	Requirements for polyurethane synthetic leather used in furniture upholstery
GB 28007-2011	Safety requirements for children's furniture if specified for family dining use

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to plywood inner frame components;
2. GB/T 16799-2008: Requirements for polyurethane synthetic leather used in furniture upholstery;
3. GB 28007-2011: Safety requirements for children's furniture if specified for family dining use;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · DC-TAN-001

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · DC-TAN-001

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · DC-TAN-001Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Tan Faux Leather Armless Dining Chair (model DC-TAN-001) embodies a modern minimalist silhouette defined by clean, unadorned lines, a streamlined armless profile, and tapered splayed black metal legs that create a light, open visual presence. Its one-piece contoured seat and back form a unified upholstered unit, supported by a four-point leg layout with a 500mm floor contact span that delivers balanced, grounded placement without bulky visual weight. Constructed for enduring daily use, the chair features a 0.8mm thick tan PU faux leather upholstery with a blended backing of PVC, cotton, and polyester, stitched at a consistent 6 stitches per 30mm edge for neat, durable seam integrity. The seat uses a 50mm thick 45kg/m³ high-density polyurethane foam pad supported by sinuous springs and 14mm bent plywood internal panels, while the backrest holds a 30mm thick contoured 35kg/m³ foam pad, all framed by 12mm thick plywood support structures. The 19mm diameter steel legs receive a smooth black powder-coated finish, and each leg base is fitted with 5mm thick anti-scratch rubber pads to protect floor surfaces. Functional design supports flexible, low-fuss use: the contoured seating shape provides upright support for table-side dining, while the armless profile allows the chair to tuck fully under standard 750mm high dining tables to reduce visual clutter and save floor space. The splayed leg layout delivers anti-tip stability, the smooth faux leather surface wipes clean with a damp cloth for quick maintenance, and the chair supports a recommended static load capacity of 136kg, with a backrest static load rating of 76kg. Its lightweight 7kg per-unit weight allows easy repositioning, and non-locking stackability simplifies storage when chairs are not in use. Assembly requires attaching legs to the pre-installed seat frame with included hardware and tool, taking 40 minutes per set. This chair fits a range of settings, including residential dining rooms, high-traffic restaurant and cafe seating areas, home office workspaces as a side desk chair, vanity stations for grooming use, and small apartment dining areas where flexible storage is a priority. Procurement teams should note the 1-year warranty coverage, 23kg packaged gross weight per set split across 2 cartons, and 135 set maximum load for a 20ft general purpose container at 85% space utilization, to plan delivery, storage, and bulk order logistics accurately. The upholstery carries a 50000-cycle abrasion resistance rating, and the 60% foam rebound rate supports consistent comfort across repeated use.

Tan Faux Leather Armless Dining Chair with Black Splayed Metal Legs Specifications

Suppliers and stock