Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	580 × 610 × 890 mm
Seat height	480 mm
Seat width	480 mm
Seat depth	460 mm
Seat cushion thickness	102 mm
Backrest height above seat	350 mm
Backrest width	520 mm
Front leg taper length	420 mm
Rear leg splay angle from vertical	8 degrees
Horizontal stretcher height above floor	180 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Static load capacity	136 kg
Net weight per chair	8 kg
Seat foam density	35 kg/m³
Foam rebound rate	45%
Fabric abrasion resistance	30000 double rubs
Seam stitch pitch	8 stitches per inch
Recommended daily use duration	8 hours
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Leg frame	Solid rubberwood with walnut-toned stain finish
Central back stretcher	Solid hardwood vertical support connecting backrest to rear frame
Horizontal support stretchers	Solid hardwood cross bars connecting adjacent legs below seat
Upholstery fabric	Textured linen-look 100% polyester woven fabric, moss green
Seat cushion core	High-density polyurethane foam padding
Backrest padding	25 mm thick soft polyurethane foam layer
Foot caps	Felt floor protection pads affixed to leg bases
Joinery hardware	Zinc-plated steel dowels and screw connectors
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating function	Fixed armless upright seating for standard 750 mm height dining tables
Back support	Curved oval padded backrest provides mid-back lumbar support
Frame stability	Splayed four-leg design with cross stretchers prevents wobble during use
Floor protection	Felt foot caps slide smoothly without scratching hard flooring
Assembly requirement	Knock-down assembly with included hardware and instructions
Cleaning method	Spot-clean fabric with mild upholstery cleaner, wipe wood with damp cloth
Stacking compatibility	Non-stackable fixed frame design
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining room	Seating for 6place settings at standard height rectangular or round dining tables
Kitchen breakfast nook	Compact armless profile fits small spaces without blocking walkways
Home office visitor seating	Appropriate seat height for use alongside 750 mm height office desks for guest seating
Cafe and bistro casual dining	Durable fabric and wood construction suits light commercial food service spaces
Small apartment open plan living	Mid-century aesthetic complements modern minimalist interior design schemes
Matching set configuration	Available as sets of 2 or 4 to coordinate with walnut-tone dining tables
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Domestic furniture seating strength, durability and safety requirements for dining chairs
EN 1022:2018	Domestic seating stability test method to verify splayed leg stability

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to frame strength and stability checks
GB/T 1952.1-2012	Upholstered furniture seating durability test standard for domestic dining use
GB 18584-2001	Limit of harmful substances in wooden furniture for indoor environmental compliance

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to frame strength and stability checks;
2. GB/T 1952.1-2012: Upholstered furniture seating durability test standard for domestic dining use;
3. GB 18584-2001: Limit of harmful substances in wooden furniture for indoor environmental compliance;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · DC-MOSS-WL-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · DC-MOSS-WL-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · DC-MOSS-WL-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Mid-Century Armless Upholstered Dining Chair (model DC-MOSS-WL-01) features a refined, streamlined silhouette defined by a gently curved oval padded backrest, splayed tapered legs, and a compact armless profile finished in a warm walnut wood tone paired with rich moss green textured upholstery. Its four-leg base incorporates a central vertical back stretcher connecting the backrest to the rear frame, plus horizontal cross stretchers between adjacent legs below the seat, creating a stable visual structure that balances mid-century design appeal with understated, space-efficient proportions. Crafted for everyday durability, the chair’s frame is built from solid rubberwood finished with a walnut-toned stain, joined with zinc-plated steel dowels and screw connectors for structural integrity. The seat rests on a bent plywood internal support board, topped with a thick high-density polyurethane foam core, while the backrest features a soft foam layer for cushioned support. All upholstered surfaces are covered in a textured, linen-look 100% polyester woven fabric, and felt pads affixed to the base of each leg protect hard flooring from scuffs and scratches. Designed for fixed, non-adjustable upright seating, the chair is sized to pair with standard 750mm height dining tables, with its curved backrest delivering targeted mid-back lumbar support. The splayed leg and cross-stretcher design prevents wobble during regular use, and the armless form allows for flexible placement without obstructing surrounding walkways. The fabric upholstery resists routine wear from daily use, and care is straightforward: spot-clean fabric surfaces with mild upholstery cleaner, and wipe wood components with a damp cloth. The chair is delivered for knock-down assembly with all required hardware and instructions included, and is not designed for stacking. This model suits a wide range of residential and light commercial settings. In homes, it works as seating for residential dining rooms, fitting six place settings around standard rectangular or round dining tables, tucks neatly into kitchen breakfast nooks, serves as guest seating in home offices, and complements modern minimalist schemes in small open-plan apartments. For commercial use, its durable construction makes it well-suited for casual dining in cafes and bistros. It is available in matching sets of 2 or 4 to coordinate seamlessly with walnut-tone dining tables. For procurement planning, note that each set is packaged across two cartons, with an assembly time of 40 minutes per set. The static load capacity supports regular adult use, with a recommended daily use duration of 8 hours suitable for both residential and light commercial applications. When calculating freight needs, account for packaged set dimensions and weight to align with storage, delivery, and installation workflows.

Mid-Century Armless Upholstered Dining Chair, Moss Green Textured Fabric with Walnut Finish Wood Frame Specifications

Suppliers and stock