Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	630 × 630 × 1000 mm
Seat height	495 mm
Inner seat width	590 mm
Inner seat depth	520 mm
Backrest height above seat	505 mm
Armrest height above seat	180 mm
Leg taper height	430 mm
Gold foot cap length	50 mm
Seat cushion thickness	80 mm
Leg splay outward angle	12 degrees
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended static load capacity	150 kg
Net weight per chair	8 kg
Seat foam density	45 kg/m³
Seat foam rebound rate	60%
Upholstery abrasion resistance	50000 Martindale cycles
Frame static load rating per leg	40 kg
Seam stitch pitch	8 stitches per 30 mm
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Front seat and back upholstery	Cream-colored faux leather
Rear back panel upholstery	Dark brown faux leather
Seat and back padding core	High-density polyurethane foam
Internal support frame	12 mm thick plywood seat pan
Leg construction	25 mm diameter powder-coated black steel tube
Leg foot caps	Brass-finish gold metal with non-slip plastic glide
Internal webbing support	50 mm wide elastic webbing under seat foam
Upholstery edge trim	Matching color stitched piping
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating support	Fixed rigid position with no recline, swivel or height adjustment
Arm support	Integrated curved armrests merged with backrest for side support
Floor protection	Non-marking glides at foot cap ends prevent floor scratching
Cleaning performance	Wipe-clean faux leather surface resists water and common food stains
Stacking capability	Non-stacking fixed frame design
Arm clearance	180 mm arm height fits under standard 750 mm high dining tables
Structural stability	Outward-splayed four-leg base provides anti-tip support for regular use
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining room use	Pairs with standard 750 mm height dining tables for home meals
Cafe and bistro seating	Light luxury finish suits modern casual dining and coffee shop settings
Hotel restaurant and guest room use	Decorative two-tone design fits boutique hospitality common areas
Home office accent seating	Works as a guest chair beside home desks with matching table height
Show home and model apartment staging	Two-tone finish complements modern minimalist interior design schemes
Event and banquet secondary seating	Fixed sturdy frame supports temporary event dining arrangements
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Domestic seating safety recommendation	EN 12520:2015 Furniture strength, durability and safety for domestic seating
Upholstered furniture flammability recommendation	EN 1021:2014 Ignition resistance of upholstered furniture smouldering cigarette
Surface finish durability recommendation	EN 12720:2009+A1:2013 Furniture assessment of surface resistance to cold liquids

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Domestic furniture safety recommendation	GB/T 3324General technical requirements for wooden furniture
Upholstered furniture durability recommendation	GB/T 35607Test methods for durability of upholstered furniture seats
Metal furniture coating recommendation	GB/T 3323Metal furniture general technical requirements
Formaldehyde emission recommendation	GB 18584Indoor decorating materials limit of harmful substances

Standardized tender description text

This product must meet the following technical requirements:
1. Domestic furniture safety recommendation: GB/T 3324General technical requirements for wooden furniture;
2. Upholstered furniture durability recommendation: GB/T 35607Test methods for durability of upholstered furniture seats;
3. Metal furniture coating recommendation: GB/T 3323Metal furniture general technical requirements;
4. Formaldehyde emission recommendation: GB 18584Indoor decorating materials limit of harmful substances;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · DIN-ARM-2T-BLKGLD-001

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · DIN-ARM-2T-BLKGLD-001

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · DIN-ARM-2T-BLKGLD-001Open Export Tool

Quick Actions

Post an RFQ

Product Description

This unbranded dining armchair, model DIN-ARM-2T-BLKGLD-001, carries a modern light luxury aesthetic defined by its intentional two-tone finish: soft cream faux leather covers the front seat and front backrest panel, while rich dark brown faux leather clads the rear back panel, accented by matching color stitched piping along upholstery edges. Its fixed four-leg structure uses outward-splayed powder-coated black steel tube legs capped with polished brass-finish gold foot caps that hold non-slip, non-marking plastic glides, creating a streamlined, elevated silhouette that balances visual warmth and subtle metallic detail. Integrated curved armrests merge seamlessly with the backrest to deliver continuous, unbroken side support, with clean lines suited to coordinated interior schemes. The chair is constructed for durable everyday use: its internal support combines a bent plywood seat support board, wide elastic webbing under the seating core, and high-density 45 kg/m³ polyurethane foam padding with 60% rebound rate, wrapped in abrasion-resistant faux leather tested to 50000 Martindale cycles. Seams are finished with a consistent 8 stitches per 30 mm pitch for long-term seam integrity, and each leg is engineered to support regular static loads, with a total recommended static load capacity of 150 kg per chair. Fixed in a rigid, non-adjustable position with no recline, swivel, or height modification, the chair offers stable, anti-tip support via its splayed leg base, with a seat height and 180 mm arm clearance sized to slide neatly under standard 750 mm high dining tables. The wipe-clean faux leather surface resists water and common food stains for quick, low-effort upkeep, though the fixed frame does not support stacking. This chair suits a broad range of spaces: it works as primary seating for residential dining rooms, complementary seating for modern cafes, bistros, boutique hotel restaurants and guest room common areas, an accent guest chair for home offices, a styling piece for show home and model apartment staging, and sturdy secondary seating for temporary event and banquet dining arrangements. For procurement, note each set is packaged across two cartons, requires 40 minutes of assembly per unit, and the non-stacking design should be factored into storage and loading plans, with 135 sets fitting a 20GP container at 85% space utilization.

Two-Tone Cream and Dark Brown Upholstered Dining Armchair with Black Metal Legs and Gold Foot Caps Specifications

Suppliers and stock