| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 880 x 720 x 880 mm | |
|---|---|---|
| Seat height (floor to cushion top) | 480 mm | |
| Seat width (between armrests) | 520 mm | |
| Seat depth (front to back cushion) | 520 mm | |
| Seat cushion thickness | 120 mm | |
| Backrest height (seat top to back crest) | 420 mm | |
| Armrest height (floor to arm top) | 660 mm | |
| Leg height (floor to seat frame bottom) | 360 mm | |
| Leg splay angle (outward from vertical) | 12 degrees | |
| Teal outer side panel width | 150 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Net weight | 20 kg | |
|---|---|---|
| Recommended static load capacity | 150 kg | |
| Seating capacity | 1 adult | |
| Seat foam density | 35D | |
| Foam rebound rate | 45% | |
| Upholstery fabric abrasion resistance | 30000 Martindale cycles | |
| Static leg load rating per leg | 50 kg | |
| Seam strength | 120 N | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Inner seat/back upholstery | Beige matte woven polyester fabric | |
|---|---|---|
| Outer side panel upholstery | Dark teal woven polyester fabric | |
| Edge trim | Black synthetic leather contrast piping | |
| Seat/back padding | 35D high-density polyurethane foam | |
| Internal support frame | 18mm thick plywood frame | |
| Support legs | Black finished solid rubberwood tapered legs | |
| Seat support base | Elastic webbing suspension under cushion | |
| Assembly hardware | Zinc-plated steel screws and floor glides | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Base configuration | Fixed four-point splayed leg base, no swivel or tilt | |
|---|---|---|
| Assembly requirement | Knock-down leg attachment with included hardware | |
| Arm support | Integrated curved wrap-around armrests connecting directly to backrest | |
| Cushion design | Fixed tailored seat cushion with tailored edge stitching | |
| Floor protection | Non-marking plastic glides fitted to each leg base | |
| Posture support | Contoured angled backrest for 105-degree relaxed lounge seating | |
| Color configuration | Dual-tone beige/teal upholstery with black piping finish | |
| Maintenance | Spot-cleanable fabric upholstery with removable cushion cover option | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential living room | Use as standalone accent chair next to sofa or side table for casual seating | |
|---|---|---|
| Office reception/lounge | Deploy in visitor waiting areas or informal meeting zones for guest seating | |
| Hotel guest room | Place in bedroom corner or reading nook for additional guest lounge seating | |
| Cafe/lounge space | Use in boutique hospitality settings for compact single-guest seating | |
| Study/home office | Position next to desk or bookshelf for short-break relaxed seating | |
| Showroom/model home | Use as styled accent piece in modern interior design displays | |
| Small apartment use | Compact footprint suitable for space-limited urban living environments | |
| Recommended Matching Desk Size | 2.4 m executive desk |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture strength, durability and safety for domestic seating | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture ignitability resistance to cigarette smoulder |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to wood frame and legs | |
|---|---|---|
| GB 18584-2001 | Indoor decorating material limit of harmful substances for wood furniture | |
| GB/T 1952.1-2012 | Upholstered furniture seating mechanical and structural safety requirements | |
| GB 20400-2006 | Leather and fur harmful substance limit, applicable to contrast piping if applicable |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to wood frame and legs; 2. GB 18584-2001: Indoor decorating material limit of harmful substances for wood furniture; 3. GB/T 1952.1-2012: Upholstered furniture seating mechanical and structural safety requirements; 4. GB 20400-2006: Leather and fur harmful substance limit, applicable to contrast piping if applicable; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
