| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 480 x 520 x 1000 mm | |
|---|---|---|
| Seat height | 660 mm | |
| Seat surface dimensions | 480 x 390 mm | |
| Seat cushion thickness | 70 mm | |
| Backrest height above seat | 280 mm | |
| Footrest height above floor | 220 mm | |
| Leg splay base width | 500 mm | |
| Leg tube diameter | 19 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Net weight per unit | 13 kg | |
|---|---|---|
| Static load capacity | 150 kg | |
| Seat foam density | 45 kg/m³ | |
| Foam rebound rate | 40% | |
| Upholstery abrasion resistance | 50000 double rubs | |
| Frame static load rating per leg | 40 kg | |
| Recommended user weight | 136 kg | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat upholstery | 0.8 mm thick tan faux leather, stain-resistant surface | |
|---|---|---|
| Seat padding | High-density polyurethane foam, contoured for comfort | |
| Backrest padding | Thin bonded foam layer over rigid shell, matching tan upholstery | |
| Outer seat/back shell | Matte black rigid polypropylene, structural support layer | |
| Frame and legs | 1.2 mm thick powder-coated black steel, tapered splayed design | |
| Footrest | Welded black steel crossbar, integrated with leg frame | |
| Foot pads | Non-slip rubber glides, floor protection at each leg base | |
| Seam construction | 8 mm stitch pitch, reinforced edge stitching on upholstery | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Height adjustment | Fixed 660 mm seat height, no swivel or lift mechanism | |
|---|---|---|
| Foot support | Dual horizontal welded steel footrests for both seating directions | |
| Back support | Low upright backrest for lumbar support during counter-height perching | |
| Floor protection | Rubber glides prevent hard floor scratches and reduce movement noise | |
| Seating access | Armless design allows side entry for tight kitchen island or bar layouts | |
| Frame stability | Splayed four-leg geometry provides anti-tip stability for elevated seating | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential kitchen islands | Suits 900 mm high kitchen counters for casual dining and meal prep seating | |
|---|---|---|
| Break room bar areas | Works for office break room elevated counter seating for short rest periods | |
| Cafe and bistro seating | Appropriate for modern industrial-style cafe bar counter customer seating | |
| Home bar spaces | Fits 1050 mm home bar surfaces for relaxed entertaining seating | |
| Compact balcony bar setups | Armless narrow footprint fits small space elevated balcony bar configurations | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Domestic seating strength and durability | EN 12520:2015 | |
|---|---|---|
| Furniture seating flammability | EN 1021:2014 |
US and Canada office-furniture standards
| Small office/home office seating | ANSI/BIFMA X2015 | |
|---|---|---|
| Seating stability testing | ANSI/BIFMA X2017Clause 6 |
Standards applicable to China-market projects
| General furniture mechanical safety | GB/T 3324 | |
|---|---|---|
| Upholstered furniture harmful substances | GB 18584 |
This product must meet the following technical requirements: 1. General furniture mechanical safety: GB/T 3324; 2. Upholstered furniture harmful substances: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
