Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	640 × 660 × 830 mm
Seat height	500 mm
Seat width	600 mm
Seat depth	460 mm
Backrest height above seat	330 mm
Armrest height above seat	200 mm
Leg tube diameter	25 mm
Seat cushion thickness	115 mm
Rear leg splay	30 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net weight per chair	10.2 kg
Static weight capacity	136 kg
Seat foam density	40 kg/m³
Foam rebound rate	60%
Upholstery abrasion resistance	50000 Martindale cycles
Recommended daily usage duration	8 hours
Floor protection pad diameter	20 mm
Leg static load per leg	40 kg
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Inner seat/back/arm upholstery	Orange polyurethane faux leather, 1.0mm thickness
Outer back/arm upholstery	Light greige polyurethane faux leather, 1.0mm thickness
Seat padding core	High-density polyurethane foam, 115mm thick
Backrest padding core	Medium-density polyurethane foam, 60mm thick
Internal support frame	1.2mm thick powder-coated steel tube
Leg structure	Matte black powder-coated iron tube, 25mm diameter
Seam detailing	Light gray contrast piping, 6mm stitch pitch
Foot pads	Non-slip rubber, 20mm diameter
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating structure	Fixed non-swivel, non-reclining rigid frame
Height adjustment	No adjustable mechanism, fixed 500mm seat height
Mobility features	No casters, rubber foot pads for stationary placement
Armrest design	Integrated wrap-around armrests connecting back to seat front
Upholstery care	Wipe-clean faux leather surface, stain-resistant coating
Assembly requirement	Knock-down assembly with included hardware
Stacking capability	Non-stackable contoured design
Floor compatibility	Suitable for hard wood, tile, and low-pile carpet flooring
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Carton dimensions per chair	700 x 700 x 900 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining room	Seating for 6person dining tables, matches modern Nordic and minimalist interiors
Cafe and casual restaurant	Durable commercial-grade seating for food service venues
Home office guest seating	Side chair for desk or meeting nook for short-duration visitor use
Breakout and co-working space	Casual seating for collaborative lounge and break areas
Event and banquet rental	Lightweight easy-to-move seating for temporary event setups
Apartment and studio furnishing	Space-saving armchair for compact dining areas in small living units
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Furniture strength, durability and safety requirements for domestic seating
EN 1022:2018	Domestic furniture seating determination of stability
EN 13759:2002	Furniture seating test methods for seat and back durability

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applies to structural stability testing
GB/T 16799-2008	Polyurethane synthetic leather for furniture, applies to upholstery material quality
GB 28007-2011	Furniture mechanical and physical performance test for chairs and stools
GB 18584-2001	Indoor decoration material limit of harmful substances for wooden furniture

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applies to structural stability testing;
2. GB/T 16799-2008: Polyurethane synthetic leather for furniture, applies to upholstery material quality;
3. GB 28007-2011: Furniture mechanical and physical performance test for chairs and stools;
4. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · DIN-ARM-2T-OBK-01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · DIN-ARM-2T-OBK-01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · DIN-ARM-2T-OBK-01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Two-Tone Orange and Greige Upholstered Dining Armchair (model DIN-ARM-2T-OBK-01) is an unbranded fixed seating piece designed with a modern, minimalist color-block silhouette. It features integrated wrap-around armrests that flow seamlessly from the contoured backrest to the front of the seat, accented with light gray contrast piping for sharp visual definition. The two-tone upholstery pairs vibrant orange faux leather on the inner seat, backrest, and arm surfaces with soft light greige faux leather on the outer back and arm panels, supported by slender matte black metal legs that lend a light, streamlined profile. Constructed for regular daily use, the chair uses 1.0mm thick polyurethane faux leather across all upholstered surfaces, with a stain-resistant, wipe-clean coating that simplifies routine maintenance. The seat core is fitted with thick high-density foam cushioning, while the backrest uses medium-density foam for balanced support, mounted to an internal powder-coated steel tube frame and bent plywood support board. The matte black powder-coated iron legs are fitted with non-slip rubber foot pads to stay securely in place without scuffing floor surfaces, with no casters, swivel, or recline mechanisms to maintain a rigid, stable structure. It ships as knock-down units with included hardware, requiring assembly on receipt. With a fixed seat height suited for standard table heights, the chair fits both residential and light commercial settings. In homes, it works as seating for dining tables, as a compact guest chair in home office nooks, or as space-efficient seating for small apartment and studio dining areas. In commercial spaces, it serves as durable seating for cafes and casual restaurants, casual breakout seating for co-working spaces, or lightweight, easy-to-move seating for temporary event and banquet setups, pairing naturally with modern Nordic and minimalist interior schemes. For procurement planning, note the chair is non-stackable, so storage space should be allocated to accommodate individual units when not in use. The durable upholstery is engineered to hold up to consistent daily use across high-traffic settings, and foot pads prevent floor damage across hard surface flooring types. Order quantities can be calibrated to match standard dining table seating configurations or flexible event capacity needs, with packaged units shipped across two cartons per set.

Two-Tone Orange and Greige Upholstered Dining Armchair with Matte Black Metal Legs Specifications

Suppliers and stock