Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	490 × 535 × 841 mm
Overall assembled dimensions	490 x 535 x 841 mm
Seat height from floor	483 mm
Seat depth (front to back)	406 mm
Internal backrest height (seat to top)	409 mm
Seat usable width (narrowest point)	440 mm
Leg splay base footprint diameter	520 mm
Front seat edge waterfall overhang	30 mm
Wood leg cross-section width	32 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net weight per chair	5.5 kg
Static vertical weight capacity	136 kg
Recommended user weight limit	120 kg
Shell wall thickness	5 mm
Leg assembly joint static load rating	150 kg
Expected service life for regular use	5 years
Available color finish options	8
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Seat and back shell	Matte polypropylene (PP) copolymer, 5mm wall thickness, seamless molded
Support leg frame	Solid steamed beech wood, natural clear lacquer finish, cross-braced H-stretcher
Leg mounting hardware	Zinc-plated steel M6 bolt sets with pre-installed threaded inserts
Floor protection pads	8mm thick non-marking natural rubber pads, fitted to each leg base
Shell surface finish	Textured matte non-glare finish, stain-resistant and wipe-clean
Wood leg finish	Low-VOC water-based clear lacquer, 2 coat application, light walnut tone appearance
Joint connection brackets	Powder-coated steel angle brackets connecting shell to wood frame
Seam and edge treatment	Radius 3mm rounded edges on all shell perimeters, no sharp edges
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Height and tilt adjustment	No adjustable mechanisms; fixed static seating position
Mobility and rotation	No swivel, casters, or folding mechanism; fixed stationary placement
Seating ergonomics	Contoured waterfall front seat edge and curved lumbar back support for upright dining posture
Stacking capability	Non-stackable design; cross-braced wood base prevents vertical nesting
Floor compatibility	Non-slip rubber foot pads safe for hard wood, tile, and laminate flooring without scratching
Cleaning and maintenance	Smooth non-porous shell surface wipes clean with damp cloth, no fabric/upholstery to stain
Assembly requirement	Knock-down assembly required; 8 bolts attach pre-finished legs to shell with included Allen key
Tuck-under clearance	Armless low-profile design fits fully under standard 750mm height dining tables for space saving
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining rooms	Pairs with standard height dining tables for 6person dining setups
Cafes and casual restaurants	Durable easy-clean shell suitable for high-turnover casual dining environments
Home office desk seating	Armless compact profile fits under standard 750mm height office desks for guest or task seating
Break rooms and conference areas	Lightweight stackable alternative? No, fixed design suitable for static employee break seating
Small apartment dining spaces	Minimalist visual profile and armless design reduces visual clutter in compact spaces
Outdoor covered patio use	Waterproof PP shell resists moisture for semi-outdoor covered dining areas
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Furniture - Seating - Test methods for strength and durability	EN 12520:2015
Furniture - Chairs and tables for domestic use - Mechanical safety requirements	EN 1022:2018
Furniture - Assessment of surface resistance to cold liquids	EN 12720:2013

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

General technical requirement for furniture (chairs and stools)	GB/T 3324
Furniture mechanical performance test for seating	GB/T 10357.3
Limit of harmful substances in wooden furniture	GB 18584

Standardized tender description text

This product must meet the following technical requirements:
1. General technical requirement for furniture (chairs and stools): GB/T 3324;
2. Furniture mechanical performance test for seating: GB/T 10357.3;
3. Limit of harmful substances in wooden furniture: GB 18584;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · DC-PP001-WHT

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · DC-PP001-WHT

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · DC-PP001-WHTOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This armless molded shell dining chair features a clean, minimalist visual profile defined by a seamless single-form seat and back shell paired with outward splayed solid wood legs, creating a light, unobtrusive silhouette that reduces visual clutter in tight layouts. The armless, compact form fits neatly beneath standard table heights, while the splayed leg base delivers a stable, balanced footprint without bulky structural elements. The chair is constructed with a 5mm thick seamless matte polypropylene copolymer shell, supported by an internal bent plywood board, and mounted to a frame of solid steamed beech wood finished with two coats of low-VOC water-based clear lacquer in a light walnut tone. The wood frame includes a cross-braced H-stretcher for structural rigidity, connected to the shell via powder-coated steel angle brackets and zinc-plated steel bolt sets with pre-installed threaded inserts. Each leg is capped with a thick non-marking natural rubber foot pad, and all shell perimeters feature rounded edges to eliminate sharp contact points. The textured matte non-glare shell surface is stain-resistant and wipe-clean, with a contoured waterfall front seat edge and curved lumbar back support shaped to encourage upright, comfortable seating posture. The chair has no adjustable, swivel, caster, or folding mechanisms, and its cross-braced base prevents vertical stacking, making it intended for fixed stationary placement. It is compatible with hardwood, tile, and laminate flooring, with no risk of surface scratching from foot pads, and its non-porous shell requires only a damp cloth for routine cleaning, with no upholstered surfaces to trap spills or stains. Knock-down assembly is required, with all necessary hardware and an Allen key included to attach pre-finished legs to the shell. This chair suits a wide range of residential and commercial settings, including home dining rooms paired with standard-height tables, small apartment dining spaces, casual cafes and high-turnover restaurants, home office guest or task seating, employee break rooms and static conference areas, and covered semi-outdoor patios where the moisture-resistant shell holds up to ambient humidity. For procurement, note that units ship across two cartons per set, with a documented assembly time per unit, and that finish options are available to coordinate with existing interior palettes. The fixed non-stacking design supports stable long-term placement in regular-use environments, with an expected service life aligned to consistent daily use.

Armless Molded Shell Dining Chair with Splayed Solid Wood Legs Specifications

Suppliers and stock