Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	600 × 540 × 900 mm
Seat height	480 mm
Seat width	520 mm
Seat depth	480 mm
Seat cushion thickness	100 mm
Backrest height from seat	420 mm
Armrest height from floor	720 mm
Leg taper diameter at floor	12 mm
Base footprint width	560 mm
Base footprint depth	500 mm
Backrest width at top	580 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net weight per chair	8 kg
Recommended static load capacity	160 kg
Seat foam density	45 kg/m³
Seat foam rebound rate	60%
Seam stitch pitch	8 mm
Leveling glide adjustment travel	10 mm
Frame static load test rating	160 kg
Available color options	8
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Inner seat and back upholstery	Polyester-blend bouclé textured fabric
Outer back and seat edge trim	Dark matte PU faux leather
Seat core padding	High-density polyurethane foam
Internal seat support panel	12 mm thick plywood
Leg material and finish	Matte black powder-coated 1.2mm thick steel tube
Foot pads	Non-marking TPE rubber rotating glides
Frame bracing	Cross-braced steel under-seat support
Upholstery adhesive	Low-VOC water-based furniture adhesive
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating support	Fixed upright posture support for 1 user at standard dining table height
Integrated armrests	Continuous curved wrap-around arm support merged with backrest
Leveling adjustment	Rotating TPE glides adjust for uneven hard floors without scratching
Assembly requirement	Knock-down leg attachment to pre-upholstered seat body with included hardware
Surface maintenance	Faux leather surfaces wipe clean; boucle surfaces support spot cleaning
Floor protection	Non-marking glides prevent scuffs on hardwood, tile, and vinyl flooring
Stability design	Splayed tapered legs create wide footprint to resist tipping during use
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining space	Pairs with standard 750mm high dining tables for everyday meal seating
Home office guest seating	Serves as a side chair in home offices for short-term visitor use
Cafe and restaurant seating	Suitable for casual commercial dining areas with mixed material durability
Open-concept kitchen island use	Fits under counter-height overhangs for casual breakfast seating
Waiting area supplementary seating	Works in boutique lobby or breakout spaces for temporary guest seating
Modern minimalist interior schemes	Complements monochrome, contemporary, and industrial design palettes
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Domestic seating safety recommendation	EN 12520:2015 Furniture strength, durability and safety for domestic seating
Upholstered furniture fire safety recommendation	EN 1021:2014 Ignition resistance of upholstered furniture (cigarette test)
Surface scratch resistance recommendation	EN 15186:2012 Furniture assessment of surface resistance to scratching

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Seating structural strength recommendation	GB/T 3324General technical requirements for wooden furniture
Upholstered furniture durability recommendation	GB/T 2012Upholstered furniture sofas, reference for seat load and durability
Formaldehyde emission recommendation	GB 18584Indoor decoration materials limit of harmful substances in wooden furniture

Standardized tender description text

This product must meet the following technical requirements:
1. Seating structural strength recommendation: GB/T 3324General technical requirements for wooden furniture;
2. Upholstered furniture durability recommendation: GB/T 2012Upholstered furniture sofas, reference for seat load and durability;
3. Formaldehyde emission recommendation: GB 18584Indoor decoration materials limit of harmful substances in wooden furniture;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · UDAC-TUB-600900

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · UDAC-TUB-600900

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · UDAC-TUB-600900Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Two-Tone Curved Tub Upholstered Dining Armchair with Black Tapered Metal Legs, model UDAC-TUB-600900, is an unbranded contemporary seating solution designed for versatile use across residential and light commercial settings. Its signature curved tub silhouette merges integrated wrap-around armrests with a smoothly contoured backrest for a cohesive, streamlined profile, accented by a deliberate two-tone upholstery contrast. The inner seat and back surfaces are finished in soft polyester-blend bouclé-textured fabric, while the outer back and seat edge trim are clad in dark matte PU faux leather. The chair stands on four splayed, tapered matte black powder-coated steel legs that create a wide, stable footprint to resist tipping during use, with clean, angular lines that complement modern, minimalist, monochrome, and industrial interior design palettes.
Beneath its upholstered surface, the chair is built for durable, everyday use. The seat core is padded with high-density polyurethane foam, supported by an internal bent plywood panel and cross-braced steel under-seat structure for consistent upright posture support for a single user at standard dining table heights. All upholstery is secured with low-VOC water-based furniture adhesive, and the tapered steel legs terminate in non-marking, rotating TPE rubber glides that adjust to compensate for uneven hard floors, while preventing scuffs and scratches on hardwood, tile, and vinyl surfaces. The chair ships as a knock-down assembly, with legs attaching to the pre-upholstered seat body using included hardware, requiring 40 minutes of assembly time per unit. Maintenance is straightforward: faux leather surfaces wipe clean easily, and bouclé sections support simple spot cleaning for accidental spills.
This armchair adapts seamlessly to a range of spaces. In residential settings, it pairs with standard-height dining tables for everyday meal seating, tucks under counter-height kitchen island overhangs for casual breakfast use, or serves as short-term guest seating in home offices. For commercial applications, it offers durable mixed-material construction suitable for casual cafe and restaurant dining areas, as well as supplementary temporary seating in boutique lobbies and office breakout spaces.
For procurement planning, the chair is packaged across two cartons per set, with clear loading metrics available for bulk freight calculations. Its fixed, four-leg base requires no ongoing adjustment beyond initial glide leveling, and its integrated armrest design eliminates separate component wear points common to chairs with attached arm fixtures. Buyers should note its static load rating aligns with standard general-use seating requirements, and its neutral two-tone finish coordinates with a broad range of existing furniture and decor schemes without requiring custom upholstery coordination. At 8kg net weight per chair, it is light enough to reposition easily between spaces while remaining stable during regular use.

Two-Tone Curved Tub Upholstered Dining Armchair with Black Tapered Metal Legs Specifications

Suppliers and stock