Primary source
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2400 × 900 × 750 mm | |
|---|---|---|
| Sintered stone tabletop thickness | 12 mm | |
| Acrylic support panel thickness | 20 mm | |
| Seating knee clearance height | 690 mm | |
| Table corner radius | 5 mm | |
| Support panel width (end panels) | 600 mm | |
| Clear floor space under table | 2200 x 800 mm | |
| Tabletop overhang past supports | 100 mm | |
| Anti-slip foot pad thickness | 5 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Distributed tabletop static load capacity | 300 kg | |
|---|---|---|
| Table net weight | 95 kg | |
| Sintered stone surface Mohs hardness | 7 | |
| Maximum short-duration contact temperature | 100 °C | |
| Seating capacity | 8 people | |
| Acrylic support light transmittance | 92% | |
| Surface stain resistance rating | Non-porous, zero liquid penetration | |
| Recommended product warranty period | 36 months | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop surface layer | Matte marble-patterned sintered stone | |
|---|---|---|
| Tabletop backing substrate | 15mm multi-layer solid wood board | |
| Support structures | High-clarity transparent cast acrylic (PMMA) | |
| Connection hardware | Zinc-plated steel locking brackets | |
| Foot protection pads | Non-marking nitrile rubber pads | |
| Table edge finish | Fine polished seamless edge | |
| Acrylic surface finish | Diamond-polished clear finish | |
| Material moisture content (wood substrate) | 10% | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Support design function | Double end-panel cantilever acrylic supports | |
|---|---|---|
| Floor protection function | Replaceable anti-slip rubber feet | |
| Surface cleaning function | Non-porous sintered stone surface | |
| Structural stability feature | Evenly distributed metal lock connectors | |
| Assembly requirement | Flat-pack assembly required | |
| Customization compatibility | Accepts custom size/edge drop options | |
| Heat resistance function | Heat-resistant tabletop surface | |
| Visual design feature | Fully transparent support structure | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining room use | Large open-plan dining spaces | |
|---|---|---|
| Modern minimalist interiors | Wabi-sabi, light luxury, contemporary design schemes | |
| Open-plan kitchen island extension | Adjacent to kitchen islands as extended casual dining surface | |
| Small commercial cafe/restaurant use | High-end boutique dining venues | |
| Showroom/design studio use | Furniture display and client meeting spaces | |
| Hard flooring environments | Concrete, tile, terrazzo and wood flooring |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Furniture surface durability | EN 15187:2006 | |
|---|---|---|
| Table structural performance | EN 12521:2015 | |
| Formaldehyde emissions | EN 13986:2004+A1:2015 |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Tabletop surface safety | GB/T 3810.3 | |
|---|---|---|
| Formaldehyde emission (substrate) | GB 18580 | |
| Structural stability for furniture | GB/T 10357.1 | |
| Acrylic material safety | GB/T 7134 |
Standardized tender description text
This product must meet the following technical requirements: 1. Tabletop surface safety: GB/T 3810.3; 2. Formaldehyde emission (substrate): GB 18580; 3. Structural stability for furniture: GB/T 10357.1; 4. Acrylic material safety: GB/T 7134; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool