Primary source
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1800 × 900 × 750 mm | |
|---|---|---|
| Sintered stone top thickness | 12 mm | |
| Under-top support backing panel thickness | 15 mm | |
| Under-table leg clearance height | 720 mm | |
| Pedestal base height | 730 mm | |
| Individual pedestal footprint | 200 x 800 mm | |
| Pedestal spacing along table length | 900 mm | |
| Tabletop edge overhang beyond pedestal (lengthwise) | 450 mm | |
| Tabletop edge overhang beyond pedestal (widthwise) | 350 mm | |
| Leveling foot adjustment thread length | 20 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Distributed static tabletop load capacity | 300 kg | |
|---|---|---|
| Tabletop surface Mohs hardness | 7 | |
| Tabletop surface water absorption rate | 0.05% | |
| Recommended seating capacity | 6 persons | |
| Surface heat resistance temperature | 180 °C | |
| Finish abrasion resistance cycles | 6000 cycles | |
| Product net weight | 80 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop surface layer | Glossy polished sintered stone, nano anti-fouling coated | |
|---|---|---|
| Tabletop reinforcement layer | Aluminum honeycomb backing panel, bonded to sintered stone underside | |
| Pedestal support frames | 1.5mm thick cold-rolled steel, matte black powder-coated finish | |
| Pedestal internal structure | Reinforced square steel tubing, welded connection points | |
| Top-to-base mounting hardware | M8 heavy-duty steel bolts with lock washers, 8 pieces total | |
| Floor contact feet | Silicone anti-slip adjustable leveling feet, 4 per pedestal | |
| Tabletop edge finish | Polished straight edge, radius 2mm chamfer | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Structural design | Fixed non-extendable rectangular top, no integrated storage or drawers | |
|---|---|---|
| Leveling adjustment | Threaded adjustable feet to compensate for 20mm floor unevenness | |
| Surface function | Non-porous easy-clean surface, resistant to common food stains and hot dish contact | |
| Seating access | Open perimeter design supporting seating on all four sides, no obstructing leg positions | |
| Floor protection | Soft silicone foot pads prevent scratching of hard flooring surfaces | |
| Assembly requirement | Knock-down assembly connecting two pedestals to tabletop with included hardware | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining room | Suitable for 6-person family meals in modern minimalist or luxury home interiors | |
|---|---|---|
| Open-plan kitchen dining area | Fits open kitchen layouts with unobstructed leg access from all sides | |
| Small apartment dining nook | 1800mm length fits standard dining zones without excessive space occupation | |
| Commercial show home display | Ideal for real estate show home styling with high-end polished finish | |
| Small cafe dining area | Durable easy-clean surface suits light commercial casual dining use |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for surface resistance to cold liquids |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural safety verification | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard for furniture use, applicable to backing panel material verification | |
| GB 18584-2001 | Limit of harmful substances in interior decoration materials furniture, for indoor air safety |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural safety verification; 2. GB/T 4897.3-2015: Particleboard for furniture use, applicable to backing panel material verification; 3. GB 18584-2001: Limit of harmful substances in interior decoration materials furniture, for indoor air safety; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool