| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1500 x 1500 x 750 mm | |
|---|---|---|
| Tabletop thickness | 20 mm | |
| Circular floor base plate diameter | 710 mm | |
| Pedestal column height | 690 mm | |
| Pedestal column top width | 220 mm | |
| Pedestal column bottom width | 380 mm | |
| Under-table knee clearance height | 670 mm | |
| Tabletop edge overhang from base edge | 395 mm | |
| Base plate thickness | 8 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net product weight | 68 kg | |
|---|---|---|
| Static distributed tabletop load capacity | 136 kg | |
| Recommended seating capacity | 6 people | |
| Powder coat finish abrasion resistance | Grade 2, 2000 cycles | |
| Stone top heat resistance | 1200 °C | |
| Table stability lateral load rating | 15 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface layer | 20mm sintered stone with matte white marble-vein finish | |
|---|---|---|
| Tabletop underpanel reinforcement | 15mm multi-layer plywood substrate | |
| Central pedestal column | 2mm thick matte black powder-coated carbon steel, faceted tapered design | |
| Floor contact base plate | 8mm thick matte black powder-coated carbon steel circular plate | |
| Tabletop-to-pedestal connection brackets | 3mm thick black powder-coated steel triangular support brackets | |
| Base plate floor protection | 5mm thick non-slip EVA rubber pads affixed to base underside | |
| Assembly hardware | Grade 8.8 zinc-plated steel bolts and lock washers | |
| Edge finish | Hand-polished beveled rounded edge on tabletop | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Assembly requirement | Knock-down assembly with three main components: tabletop, pedestal, base plate | |
|---|---|---|
| Seating access | Unobstructed perimeter legroom with no corner legs to block chair movement | |
| Surface functionality | Stain-resistant, scratch-resistant non-porous tabletop suitable for daily meal service | |
| Floor protection | Non-slip rubber pads prevent floor scratches and reduce table movement during use | |
| Weight distribution | Wide circular base plate disperses load evenly to prevent floor indentation | |
| Cleaning access | Smooth pedestal and base surfaces allow full under-table cleaning access | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining rooms | Suitable for 6person family meals in modern, minimalist or light luxury interiors | |
|---|---|---|
| Open-plan kitchen dining zones | Compact pedestal footprint fits smaller open living spaces without blocking walkways | |
| Small cafe and restaurant seating | Durable stone surface and stable base support light commercial hospitality use | |
| Apartment and condominium units | Space-efficient design provides adequate seating without protruding corner legs | |
| Show home and model unit staging | High-contrast two-tone finish works as a focal point for contemporary interior staging |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Safety, strength and durability requirements for residential dining tables | |
|---|---|---|
| EN 1022:2018 | Stability test method for domestic seating and tables | |
| EN 15185:2011 | Abrasion resistance test for furniture surface finishes |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to plywood substrate components | |
|---|---|---|
| GB/T 4893.4-2013 | Surface abrasion resistance test method for furniture finishes, applicable to tabletop coating | |
| GB/T 17657-2013 | Test methods for wood-based panels, applicable to plywood underpanel performance | |
| GB 6675-2014 | Furniture edge and tip safety requirements, applicable to tabletop edge treatment |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to plywood substrate components; 2. GB/T 4893.4-2013: Surface abrasion resistance test method for furniture finishes, applicable to tabletop coating; 3. GB/T 17657-2013: Test methods for wood-based panels, applicable to plywood underpanel performance; 4. GB 6675-2014: Furniture edge and tip safety requirements, applicable to tabletop edge treatment; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
