Name: C-shaped cantilever slide-under sofa side table with gold frame and white marble-look top
Brand: JUESHANGDA
SKU: 7XXEV0

Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	600 × 305 × 650 mm
Overall assembled dimensions	600 x 305 x 650 mm
Tabletop thickness	15 mm
Tabletop usable surface area	580 x 285 mm
Vertical support post diameter	30 mm per post, 60 mm total width per dual-post set
Flat cantilever base dimensions	500 x 250 mm
Undertable vertical clearance from floor to tabletop underside	620 mm
Base height (floor contact plate thickness)	5 mm
Gold metal edge trim width	10 mm
Seat Cushion Thickness	180 mm
Back Cushion Thickness	160 mm
Leg Height / Floor Clearance	160 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Tabletop static load capacity	50 kg
Net product weight	7.3 kg
Sintered stone top surface scratch resistance	7 Mohs
Surface heat resistance	1200 °C
Frame finish wear resistance	5000 abrasion cycles
Floor protection rating	Zero scratch risk on hard flooring
Seat Foam Density / Rebound	40 kg/m³ / 60%
Upholstery Abrasion Reference	Fabric 60000 cycles; leather-class cover 1.4 mm
Per-seat Load Reference	130 kg/seat
Upholstery Seam Pitch	4 mm

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop surface	White marble-vein sintered stone or faux marble laminate
Tabletop edge trim	Electroplated gold-finish carbon steel
Vertical support posts	2 sets of dual gold-finish steel tubes
Cantilever floor base	Brushed gold-finish flat steel plate
Frame internal joints	Welded steel connections with concealed fasteners
Floor contact pads	Non-marking TPE plastic leveling caps
Tabletop core	High-density fiberboard backing (for faux marble variant)
Frame finish	Electroplated titanium gold coating
Timber Frame Section / Moisture	Primary section ≥30 × 50 mm; recommended moisture 12%
Spring / Webbing Specification	Sinuous spring wire 4 mm; elastic webbing 70 mm wide
Leg Connector Specification	Reference M8-M10 with at least 1 mechanical fixing per leg
Reference Upholstery Color Count	Recommended 8fabric/leather color options

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Slide-under cantilever design	Flat base slides 500mm under sofas/armchairs to position top over seat/arm
Level adjustment	Rotating foot pads adjust 5mm to compensate for uneven floors
Surface functionality	Waterproof, stain-resistant top supports drinks, laptops, snacks and decor
Space-saving profile	Narrow 305mm depth fits in 350mm gaps between seating and walls
Floor protection	Non-marking pads eliminate scuffs on hardwood, tile and vinyl flooring
Assembly requirement	Knock-down assembly with included hardware connects posts, base and top
Cushion Service Configuration	Recommended 2removable/replaceable cushion methods

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Shipping carton dimensions	700 x 350 x 100 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Module Carton Dimensions	2200× 1050× 850 mm
Reference Packaging Volume	1.8 m³/item
Reference Packaged Gross Weight	110 kg/item

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Living room sofa side use	Slides under sofa armrest to hold drinks, remotes and reading materials
Small apartment compact spaces	Narrow profile fits tight gaps where freestanding end tables cannot fit
Bedside nightstand use	Tucks next to low platform beds to hold phones, lamps and bedtime items
Home office side use	Slides under desk edges to hold printers, documents or office supplies
Lounge chair accent use	Positions next to lounge/armchairs for beverage and snack placement in reception areas
Hotel guest room use	Serves as compact side table next to guest room seating or beds

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Furniture: strength, durability and safety for domestic tables
EN 15185:2011	Furniture: assessment of surface resistance to abrasion for table tops

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to tabletop core performance
GB/T 4897.3-2015	Particleboard for furniture use, applicable if MDF/particleboard core is used
GB 18584-2001	Indoor decoration material: formaldehyde emission limits for wooden furniture

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop core performance;
2. GB/T 4897.3-2015: Particleboard for furniture use, applicable if MDF/particleboard core is used;
3. GB 18584-2001: Indoor decoration material: formaldehyde emission limits for wooden furniture;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · ST-C-GOLD-WHT-650

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · ST-C-GOLD-WHT-650

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · ST-C-GOLD-WHT-650Open Export Tool

Quick Actions

Post an RFQ

Product Description

The JUESHANGDA sofa side table, model ST-C-GOLD-WHT-650, features a signature C-shaped cantilever silhouette defined by a polished gold metal frame and crisp white marble-look tabletop, delivering a modern light luxury aesthetic that balances understated elegance and intentional functional layout. Its open C-frame structure creates a clear sliding base that tucks seamlessly beneath furniture, positioning the flat tabletop directly over seating surfaces without occupying redundant floor space.
Built for long-term indoor domestic use, the table’s top is constructed from scratch-resistant sintered stone with a natural white marble vein pattern, finished with thin electroplated gold carbon steel edge trim. The supporting structure uses dual sets of gold-finish steel vertical posts connected to a flat brushed gold cantilever base via welded internal joints with concealed fasteners, all coated in a durable electroplated titanium gold finish that resists wear from regular contact. Non-marking TPE plastic leveling caps line the base’s floor contact points to eliminate scuffs on hard flooring, while the sintered stone surface offers strong heat resistance and waterproof, stain-repellent performance to support daily use.
Its core slide-under design allows the flat base to tuck fully under sofas, armchairs, low platform beds or desk edges, placing the tabletop within easy reach for drinks, laptops, snacks, reading materials, small lamps or office supplies. The rotating foot pads offer fine level adjustment to accommodate uneven floors, and its narrow depth fits easily into tight gaps where bulkier freestanding end tables cannot sit.
This versatile table suits a wide range of spaces, including compact small apartment living rooms as a sofa side accent, bedside nightstands for low-profile beds, supplementary side surfaces for home office workstations, lounge-side perches in office reception areas, and compact guest room side tables for hospitality settings.
For procurement, note the product ships in knock-down form with required assembly hardware included, with an assembly time of 40 minutes per unit. Ordering teams should account for the two-carton packaging configuration per set, and verify that on-site gap clearances align with the table’s profile to ensure proper slide-under fit for intended furniture pieces. The tabletop supports a static load of 50 kg, making it suitable for most common residential and light commercial side table use cases.

C-shaped cantilever slide-under sofa side table with gold frame and white marble-look top Specifications

Suppliers and stock