| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1350 x 1350 x 750 mm | |
|---|---|---|
| Tabletop thickness | 20 mm | |
| Central lazy susan diameter | 800 mm | |
| Pedestal base diameter (floor contact) | 720 mm | |
| Underside knee clearance to floor | 695 mm | |
| Pedestal column wall thickness | 1.5 mm | |
| Lazy susan tray thickness | 12 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static tabletop load capacity | 150 kg | |
|---|---|---|
| Lazy susan rotation cycle rating | 30000 cycles | |
| Tabletop surface Mohs hardness | 6 | |
| Instant tabletop heat resistance | 300 °C | |
| Tabletop water absorption rate | 0.05 % | |
| Anti-tip stability load (edge load) | 30 kg | |
| Warranty period for structural components | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main tabletop | 20mm polished white sintered stone | |
|---|---|---|
| Structural underlay | ENF-grade solid wood core board | |
| Conical pedestal base | Polished 304 stainless steel | |
| Lazy susan tray | Matching white sintered stone | |
| Lazy susan bearing | Stainless steel ball bearing assembly | |
| Connection hardware | Zinc-plated steel M10 mounting bolts | |
| Base floor contact pads | Non-slip rubber pads | |
| Surface finish | High-gloss polished coating | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Lazy susan rotation | 360-degree unobstructed rotation with ball bearing | |
|---|---|---|
| Assembly requirement | Knock-down assembly, attach pedestal to tabletop with included hardware | |
| Surface maintenance | Wipe clean with soft damp cloth | |
| Lazy susan removability | Tray lifts off for separate cleaning | |
| Stability design | Wide flared pedestal base with weighted floor contact | |
| Seating accommodation | Supports up to 6 standard dining chairs around perimeter | |
| Lazy susan rotation bearing diameter | 300 mm | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Note | All values are procurement engineering s, not supplier-measured data | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Fits open-plan dining areas with 2.8m+ ceiling height, paired with 6dining chairs | |
|---|---|---|
| Luxury apartment interior | Matches light neutral modern interior finishes for premium home settings | |
| Casual private dining space | Suitable for small private restaurant booths with seated meal service | |
| Open kitchen dining zone | Aligns with standard kitchen counter height for adjacent meal preparation | |
| Recommended pairing | Upholstered dining chairs with 450mm seat height for ergonomic dining posture |
EU Market Access Requirements* EN Standards
| Domestic furniture safety standard | EN 12521:2015 | |
|---|---|---|
| Furniture surface resistance standard | EN 15186:2012 |
Standards applicable to China-market projects
| Furniture general technical standard | GB/T 3324 | |
|---|---|---|
| Formaldehyde emission limit | GB 18584 | |
| Surface physical and chemical test standard | GB/T 4893.4 |
This product must meet the following technical requirements: 1. Furniture general technical standard: GB/T 3324; 2. Formaldehyde emission limit: GB 18584; 3. Surface physical and chemical test standard: GB/T 4893.4; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
