Primary source
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1400 × 800 × 750 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Tabletop overhang on long sides | 50 mm | |
| Tabletop overhang on short ends | 70 mm | |
| Under-table knee clearance height | 690 mm | |
| Leg frame vertical section width | 80 mm | |
| Lower horizontal support bar height | 80 mm | |
| Floor contact footprint length | 1260 mm | |
| Floor contact footprint width | 700 mm | |
| Edge profile thickness (finished edge) | 50 mm | |
| Seating space per diner (long side) | 600 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 45 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 150 kg | |
| Recommended seating capacity | 4 diners | |
| Surface heat resistance | 180 °C | |
| Surface scratch resistance | 6 Mohs | |
| Frame static load stability rating | 200 kg | |
| Adjustable foot adjustment range | 10 mm | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop surface | Matte dark sintered stone | |
|---|---|---|
| Tabletop backing | Fiberglass-reinforced support board | |
| Frame material | Powder-coated carbon steel tubing | |
| Frame wall thickness | 1.5 mm | |
| Frame surface finish | Matte black electrostatic powder coating | |
| Leveling feet | Nylon-tipped threaded steel inserts | |
| Assembly hardware | Zinc-plated steel bolts and allen key | |
| Joint connectors | Welded steel corner gussets | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Table structure | Fixed non-extendable, non-foldable rigid assembly | |
|---|---|---|
| Leveling function | Threaded adjustable feet on each leg contact point | |
| Surface maintenance | Wipe-clean non-porous tabletop surface | |
| Leg clearance design | Open cantilever frame without central obstruction | |
| Assembly requirement | Knock-down flat-pack assembly with included hardware | |
| Surface use compatibility | Heat-resistant surface supports hot serving dishes directly | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining room use | Suitable for small to medium apartment dining spaces | |
|---|---|---|
| Open-plan kitchen dining use | Matches modern minimalist interior design schemes | |
| Small cafe or break room use | Appropriate for light commercial casual dining settings | |
| Recommended pairing | Coordinates with upholstered dining chairs with black metal legs | |
| Surface use case | Supports daily meals, casual work, and small serving displays |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Furniture safety requirement | EN 12521:2015 | |
|---|---|---|
| Surface scratch resistance | EN 15186:2012 | |
| Stability verification | EN 1730:2012 |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Tabletop dimensional tolerance | GB/T 3324 | |
|---|---|---|
| Surface coating adhesion | GB/T 4893.4 | |
| Frame structural stability | GB/T 10357.1 |
Standardized tender description text
This product must meet the following technical requirements: 1. Tabletop dimensional tolerance: GB/T 3324; 2. Surface coating adhesion: GB/T 4893.4; 3. Frame structural stability: GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool