Primary source
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1600 × 800 × 750 mm | |
|---|---|---|
| Overall assembled dimensions | 1600 x 800 x 750 mm | |
| Tabletop thickness | 18 mm | |
| Leg upper section diameter | 60 mm | |
| Leg lower section diameter | 30 mm | |
| Under-table knee clearance height | 720 mm | |
| Leg inset from table corners | 40 mm | |
| Table corner radius | 50 mm | |
| Long-side seating clearance per person | 530 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Distributed tabletop static load capacity | 200 kg | |
|---|---|---|
| Leg static vertical load per leg | 60 kg | |
| Tabletop heat resistance (contact temperature) | 180 °C | |
| Surface abrasion resistance | 4 grade | |
| Product net weight | 48 kg | |
| Recommended seating capacity | 6 people | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop surface layer | 18mm matte white marble-veined sintered stone | |
|---|---|---|
| Tabletop backing panel | 15mm high-density particleboard support | |
| Leg structure | 1.5mm wall thickness carbon steel tubing | |
| Leg finish | Matte black epoxy powder coating | |
| Mounting hardware | M8 zinc-plated steel bolts with lock washers | |
| Edge finish | Hand-polished rounded stone edge, no sharp corners | |
| Foot pads | 8mm thick non-slip TPE adjustable floor glides | |
| Coating thickness on legs | 60 um | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Table structure type | Fixed non-extendable, non-folding rigid assembly | |
|---|---|---|
| Assembly method | Knock-down leg attachment to pre-drilled tabletop | |
| Floor protection | Adjustable TPE glides compensate for 10mm floor unevenness | |
| Surface cleaning suitability | Waterproof, stain-resistant surface wiped clean with damp cloth | |
| Under-table accessibility | Full open apron-free understructure for unobstructed leg movement | |
| Load distribution design | Four corner-mounted legs transfer weight directly to floor | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Tabletop shipping carton dimensions | 1700 x 900 x 150 mm | |
|---|---|---|
| Leg/hardware shipping carton dimensions | 800 x 600 x 200 mm | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining rooms | Serves 6 people for daily family meals and casual gatherings | |
|---|---|---|
| Open-plan apartment living areas | Minimalist silhouette complements contemporary light luxury interiors | |
| Small commercial cafe seating areas | Durable sintered stone surface withstands high-frequency daily use | |
| Studio apartment dining zones | Compact 1.6m length fits limited open floor space without crowding | |
| Recommended paired seating | Upholstered armless dining chairs with 450mm seat height for ergonomic fit |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Test methods for table stability and vertical load performance |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for backing panel structural integrity | |
|---|---|---|
| GB/T 4893.1-2021 | Surface wear resistance test method, applicable for tabletop finish durability verification | |
| GB 28007-2011 | Furniture mechanical performance test for tables, applicable for static load stability verification |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for backing panel structural integrity; 2. GB/T 4893.1-2021: Surface wear resistance test method, applicable for tabletop finish durability verification; 3. GB 28007-2011: Furniture mechanical performance test for tables, applicable for static load stability verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool