| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall extended dimensions | 2000 x 920 x 786 mm | |
|---|---|---|
| Overall contracted dimensions | 1400 x 920 x 786 mm | |
| Tabletop thickness | 12 mm | |
| Central lazy Susan diameter | 800 mm | |
| Seating knee clearance height | 660 mm | |
| Table edge radius | 60 mm | |
| Plinth base height | 126 mm | |
| Extension leaf length per side | 300 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed tabletop static load capacity | 204 kg | |
|---|---|---|
| Recommended maximum seating capacity | 8 persons | |
| Tabletop surface heat resistance | 180 °C | |
| Tabletop surface scratch resistance (Mohs hardness) | 6 grade | |
| Product net weight | 100 kg | |
| Extension rail sliding cycle rating | 10000 cycles | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main tabletop surface | 12mm polished sintered stone with white marble-vein finish | |
|---|---|---|
| Central lazy Susan tray | 10mm polished sintered stone matching tabletop pattern, mounted on rotating bearing | |
| Plinth base exterior | Matte dark brown/black engineered wood finish with anti-scratch coating | |
| Internal support frame | 1.5mm thick carbon steel square tubing reinforcement inside plinth | |
| Extension sliding rails | Cold-rolled steel rails with nylon silent sliders | |
| Lazy Susan rotating bearing | Zinc alloy 360-degree silent swivel bearing | |
| Table edge treatment | Hand-polished rounded bevel edge with no sharp corners | |
| Base floor contact pads | Non-slip rubber pads to prevent floor scratching | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Table extension mechanism | Dual-side pull-out extension leaves with self-locking steel rails, no additional tools required to extend or retract | |
|---|---|---|
| Central lazy Susan function | 360-degree smooth silent rotation for shared dish access during meals | |
| Seating flexibility | Seats 6people in contracted position, 8 people in fully extended position | |
| Surface maintenance | Non-porous sintered stone surface resists oil and stain penetration, wipes clean with damp cloth | |
| Base stability design | Wide solid plinth base eliminates wobble even when table is fully extended | |
| Extension safety feature | Built-in leaf locking mechanism prevents accidental sliding during use | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room use | Ideal for open-plan home dining areas hosting family meals and small gatherings, fits 8-seat configuration | |
|---|---|---|
| Small restaurant or private dining room use | Suitable for boutique cafes or private restaurant dining spaces needing flexible seating capacity | |
| Modern minimalist interior schemes | Matches contemporary, light-luxury, and minimalist decor styles with neutral stone finish and dark base | |
| Open-concept living-dining spaces | Low-profile plinth base and rounded edges work well in open floor plans without visual obstruction | |
| Recommended pairing | Pairs with upholstered dining chairs with metal legs for a coordinated modern dining set |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables, applicable for performance verification | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for surface resistance to abrasion for table tops | |
| EN 71-3:2019+A1:2021 | Safety of toys - Migration of certain elements, applicable for surface finish safety for household use |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to base structure quality verification | |
|---|---|---|
| GB/T 4897.3-2015 | Particleboard for furniture use, applicable if plinth uses wood-based panel core | |
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to base structure quality verification; 2. GB/T 4897.3-2015: Particleboard for furniture use, applicable if plinth uses wood-based panel core; 3. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
