| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1500 x 1500 x 750 mm | |
|---|---|---|
| Stainless steel base panel thickness | 1.2 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop static distributed load capacity | 150 kg | |
|---|---|---|
| Seating capacity | 6 people | |
| Net product weight | 110 kg | |
| Tabletop surface abrasion resistance | ≥4000 revolutions | |
| Lazy Susan rotation cycle rating | 20000 cycles | |
| Structural warranty period | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main tabletop | Polished natural marble with natural grey veining, sealed stain-resistant surface | |
|---|---|---|
| Central lazy Susan | Matching polished natural marble, mounted on silent carbon steel rotating bearing | |
| Pedestal frame panels | Mirror-polished 304 stainless steel, faceted geometric sculptural form | |
| Base decorative trim | Brushed gold-toned stainless steel, applied along full lower base perimeter | |
| Internal support structure | Powder-coated carbon steel mounting plate connecting pedestal to tabletop | |
| Tabletop edge finish | Hand-polished eased rounded edge, no sharp corners | |
| Base foot pads | Non-slip scratch-resistant rubber pads at base contact points | |
| Rotating bearing | Lubricated carbon steel ball bearing for lazy Susan swivel | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Lazy Susan rotation | 360° full manual rotation with silent bearing, no fixed locking position | |
|---|---|---|
| Seating access | Central pedestal support provides unobstructed legroom around full table perimeter | |
| Surface resistance | Sealed marble top resists high-temperature dish contact up to 120°C and common food stains | |
| Floor protection | Hidden rubber foot pads prevent hard flooring scratches and reduce movement noise | |
| Assembly | Two-part assembly connecting marble top assembly to pedestal base with mounting hardware | |
| Customization | Available in alternate marble veining colors and base finish options per supplier offerings | |
| Stability | Wide weighted pedestal base prevents tipping when normal vertical load is applied to table edges | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Fits 6-person family dining in open-plan or dedicated home dining spaces | |
|---|---|---|
| Open-plan kitchen dining zone | Complements modern luxury kitchen finishes adjacent to preparation areas | |
| Luxury apartment common areas | Serves as feature dining piece in high-end residential show flats | |
| Small private dining room | Accommodates guest dining in boutique hospitality or private club spaces |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 15187:2006 | Furniture surface test for scratch resistance, applicable to polished marble tops | |
| EN 1022:2018 | Domestic furniture seating stability test reference for table load stability |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to dining table structural safety | |
|---|---|---|
| GB 6566-2010 | Limit of radionuclides in building materials, applicable to natural marble tabletop radiological safety | |
| GB/T 4893.9-2013 | Furniture surface test for high temperature resistance, applicable to marble finish durability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to dining table structural safety; 2. GB 6566-2010: Limit of radionuclides in building materials, applicable to natural marble tabletop radiological safety; 3. GB/T 4893.9-2013: Furniture surface test for high temperature resistance, applicable to marble finish durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
