Primary source
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2000 × 1000 × 770 mm | |
|---|---|---|
| Tabletop thickness | 20 mm | |
| Leg section size | 60 x 60 mm | |
| Leg wall thickness | 2 mm | |
| Under-table knee clearance height | 680 mm | |
| Under-table knee clearance depth | 940 mm | |
| Tabletop corner radius | 5 mm | |
| Leg inset from tabletop edge | 50 mm | |
| Adjustable foot pad height | 15 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total static distributed load capacity | 300 kg | |
|---|---|---|
| Surface temperature resistance | 1200 °C | |
| Surface Mohs hardness | 6 | |
| Seating capacity | 6 people | |
| Surface water absorption rate | 0.02% | |
| Net weight reference | 85 kg | |
| Powder coat finish durability | 1000 abrasion cycles | |
| Manufacturer warranty period | 1 year | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop panel | AAA-grade matte white sintered stone | |
|---|---|---|
| Leg structure | Powder-coated black carbon steel | |
| Leg internal support | Reinforced welded steel cross bracing | |
| Tabletop mounting hardware | M8 zinc-plated steel screws | |
| Foot pads | Non-slip TPE adjustable glides | |
| Tabletop edge finish | Seamless polished sintered stone edge | |
| Surface finish layer | Nano anti-fingerprint matte coating | |
| Anti-rust treatment for legs | Electroplated base under powder coat | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Structural configuration | Fixed non-extendable rectangular top | |
|---|---|---|
| Level adjustment | Rotatable TPE foot pads adjust 15mm for uneven floors | |
| Assembly requirement | Leg attachment to pre-drilled tabletop frame | |
| Surface cleanability | Non-porous surface wipes clean without sealant | |
| Floor protection | Soft TPE glides prevent hard floor scratches | |
| Seating access | Full open clearance on all four sides | |
| Edge safety | Rounded 5mm radius corners reduce impact injury | |
| Stability performance | Welded leg joints eliminate wobble at maximum load | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining room | Seats 6 for family meals and casual gatherings | |
|---|---|---|
| Open-plan kitchen diner | Minimalist silhouette complements modern neutral interiors | |
| Small apartment open living area | Compact 1000mm depth saves floor space while seating 6 | |
| Commercial cafe private dining booth | Durable sintered stone surface withstands high daily use | |
| Recommended pairing | 6 slim-profile upholstered dining chairs (450mm seat height) | |
| Surface use suitability | Supports hot serveware, dining ware, and small decorative objects |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Applies to domestic dining table strength, durability and safety requirements | |
|---|---|---|
| EN 15187:2006 | Applies to furniture surface resistance to cold liquid staining |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool