Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1800 × 900 × 750 mm
Tabletop thickness	12 mm
Tabletop overhang per side	50 mm
Under-table knee clearance height	700 mm
Knee clearance width along long edge	1600 mm
Knee clearance depth along short edge	750 mm
Base floor plate dimensions	1200 x 700 x 20 mm
Pedestal minimum leg clearance height	150 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Table total net weight	115 kg
Evenly distributed static tabletop load	150 kg
Recommended seating capacity	6 diners
Tabletop surface heat resistance	180 °C
Tabletop scratch resistance rating	6 Mohs
Base finish salt spray resistance	48 hours
Recommended residential warranty period	3 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop surface material	12mm glossy white sintered stone
Tabletop edge finish	Polished softly rounded edge
Tabletop backing panel	15mm MDF reinforcing substrate
Pedestal support structure	2mm thick champagne finish carbon steel
Floor stabilizing plate	3mm thick rectangular flat carbon steel plate
Metal surface coating	Electrostatic powder coating with champagne metallic finish
Floor contact pads	8mm thick non-slip rubber glides
Assembly hardware	M10 zinc-plated steel connecting bolts
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating access configuration	Perimeter seating on all four sides with central pedestal support
Surface cleaning function	Non-porous stain-resistant smooth top surface
Floor level adjustment	M10 adjustable glides at floor plate corners
Assembly configuration	Two-part knock-down construction for transport
Edge protection design	Rounded eased tabletop edges
Stability design feature	Wide rectangular low-profile base plate
Available finish variants	3 base finish options, 2 top finish options
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining room use	Suitable for 6person family dining in open-plan or dedicated dining spaces
Open-plan living space application	Fits contemporary light luxury, modern minimalist interior design schemes
Small apartment dining area use	Compact central pedestal design maximizes leg room without leg obstructions
Show home/model home furnishing	Ideal for display in residential development model suites
Matching furniture recommendation	Pairs with armless upholstered dining chairs with tapered metallic legs
Floor surface compatibility	Suitable for wood, tile, vinyl and stone flooring with fitted rubber glides

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Furniture – Strength, durability and safety for domestic dining tables, applicable for structural performance verification
EN 14749:2016	Domestic and kitchen storage units/worktops safety requirements, applicable to tabletop surface performance
EN 10346:2015	Continuously hot-dip coated steel flat products, applicable to metal base material quality verification

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to structural stability and finish quality checks
GB/T 4897.3-2017	Particleboard for furniture use, applicable if MDF/wood composite backing is used in tabletop assembly
GB 6566-2010	Radionuclide limits for building decoration materials, applicable to sintered stone/ceramic tabletop material safety

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural stability and finish quality checks;
2. GB/T 4897.3-2017: Particleboard for furniture use, applicable if MDF/wood composite backing is used in tabletop assembly;
3. GB 6566-2010: Radionuclide limits for building decoration materials, applicable to sintered stone/ceramic tabletop material safety;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · DT-CX1890-WHT-CHP

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · DT-CX1890-WHT-CHP

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · DT-CX1890-WHT-CHPOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This modern rectangular dining table features a glossy white tabletop paired with a sculptural champagne curved X pedestal base, delivering a streamlined contemporary silhouette that fits light luxury and minimalist design schemes. The central pedestal layout creates an open, obstruction-free perimeter around the table, supporting comfortable access for seating on all four sides without disruptive table legs blocking knee or leg space.
The table is constructed with a durable glossy sintered stone tabletop, finished with softly rounded polished edges for gentle, safe contact, and reinforced with an MDF substrate for consistent structural support. The curved X pedestal and wide rectangular low-profile base plate are made of carbon steel, coated with an electrostatic powder coating in a warm champagne metallic finish, and fitted with non-slip, adjustable rubber glides at each corner to protect finished floors and enable stable leveling. All connection points use zinc-plated steel bolts for secure, long-lasting assembly, and the two-part knock-down construction supports efficient transport and on-site setup.
The non-porous, smooth sintered stone surface resists stains to simplify daily cleaning, while delivering reliable heat and scratch resistance for regular dining use. The wide base plate delivers consistent stability, and the open central structure delivers generous under-table clearance to accommodate movement and comfortable seating for up to six diners.
This table is well suited for a range of spaces, including residential dining rooms in open-plan or dedicated layouts, compact small-apartment dining areas, and furnished show home model suites. It pairs seamlessly with armless upholstered dining chairs featuring tapered metallic legs, and is safe for use on wood, tile, vinyl, and stone flooring when fitted with its included rubber glides.
For procurement, note that this unbranded model ships in two cartons per set, with a recommended assembly time per unit, and a recommended three-year residential warranty. Multiple finish options are available for both the tabletop and base to coordinate with varied interior palettes, and the stable, leg-free pedestal design makes it a practical choice for settings that prioritize flexible, unobstructed seating around the full table perimeter.

Modern Rectangular Glossy White Dining Table with Sculptural Champagne Curved X Pedestal Base Specifications

Suppliers and stock