Primary source
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1650 × 900 × 760 mm | |
|---|---|---|
| Tabletop thickness | 19 mm | |
| Pedestal diameter | 300 mm | |
| Pedestal height | 741 mm | |
| Under-table knee clearance height | 710 mm | |
| Under-table clearance between pedestals | 950 mm | |
| Gold foot trim height | 10 mm | |
| Tabletop rounded end radius | 450 mm | |
| Backing board thickness | 18 mm | |
| Pedestal wall thickness | 25 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total static distributed load capacity | 200 kg | |
|---|---|---|
| Tabletop heat resistance | 1200 °C | |
| Tabletop surface abrasion resistance | 6000 revolutions | |
| Seating capacity | 4 people | |
| Net product weight | 108 kg | |
| Finish stain resistance rating | Grade 5 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop surface | Glossy white sintered stone | |
|---|---|---|
| Tabletop backing | 18mm birch plywood | |
| Pedestal bodies | MDF core with off-white matte lacquer, vertical fluted texture | |
| Pedestal foot trim | Titanium gold plated stainless steel | |
| Connection hardware | Zinc-plated steel M8 connector bolts | |
| Tabletop edge treatment | Polished rounded edge, same gloss as surface | |
| Surface coating thickness | 0.2 mm UV-cured high-gloss lacquer | |
| Pedestal base foot pads | Non-slip TPE rubber pads | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Assembly requirement | Knock-down assembly, tabletop attaches to two pedestals via hardware | |
|---|---|---|
| Fixed non-extendable structure | No moving leaves or extension mechanisms | |
| Floor protection | Rubber foot pads under each pedestal prevent hard floor scuffing | |
| Surface cleaning | Non-porous glossy top allows wipe-clean with damp cloth | |
| Island attachment compatibility | Designed for fixed connection to matching kitchen island counter | |
| Stability design | Wide 300mm diameter dual pedestals eliminate wobble during dining use | |
| Edge safety | Fully rounded tabletop edges eliminate sharp corner impact risks | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining space | Suitable for open-plan kitchen-dining areas adjacent to kitchen islands | |
|---|---|---|
| 4-person household use | Ideal for small families or couples hosting casual meals | |
| Light luxury modern interior schemes | Pairs with cream, neutral or dark grey kitchen cabinetry | |
| Hardwood and tile flooring | Non-slip rubber feet prevent scratching on smooth hard floor surfaces | |
| Dining and casual entertaining | Glossy surface supports daily meals and small gatherings, easy to clean | |
| Fixed installation layouts | Suitable for permanent placement against custom kitchen island counters |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Furniture – Test methods for surface resistance to cold liquids for tabletops |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to lacquered pedestal components | |
|---|---|---|
| GB 6566-2010 | Limit of radionuclides in building materials, applicable to sintered stone tabletop | |
| GB/T 4893.4-2013 | Surface abrasion resistance test for furniture finishes, applicable to tabletop coating |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to lacquered pedestal components; 2. GB 6566-2010: Limit of radionuclides in building materials, applicable to sintered stone tabletop; 3. GB/T 4893.4-2013: Surface abrasion resistance test for furniture finishes, applicable to tabletop coating; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool