Primary source
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1800 × 900 × 750 mm | |
|---|---|---|
| Tabletop thickness | 36 mm | |
| Edge profile radius | 20 mm | |
| Pedestal base height | 714 mm | |
| Single pedestal footprint | 400 x 600 mm | |
| Vertical panel wall thickness (base) | 8 mm | |
| Under-table knee clearance height | 680 mm | |
| Clearance between two pedestal bases | 1000 mm | |
| Seating space per diner | 600 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total product net weight | 180 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 250 kg | |
| Seating capacity | 6 people | |
| Marble surface scratch resistance | Grade 3 (Mohs) | |
| Surface heat resistance | 120 °C | |
| Base lateral stability load | 80 kg | |
| Finish abrasion cycles | 1000 cycles | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop panel | Natural black marble with irregular white veining, polished gloss finish | |
|---|---|---|
| Tabletop underside reinforcement | 15mm thick plywood backing with embedded metal mounting inserts | |
| Pedestal support structure | Matte black powder-coated carbon steel, folded U-shaped panel design | |
| Base foot pads | 10mm thick adjustable non-slip rubber pads | |
| Tabletop edge finish | Hand-polished rounded bevel, matching top gloss coating | |
| Surface protective coating | Transparent epoxy resin sealer, 0.2mm thickness | |
| Mounting hardware | M10 stainless steel hex bolts with lock washers | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Support configuration | Dual symmetric U-shaped pedestal bases positioned at 25% and 75% of table length | |
|---|---|---|
| Assembly requirement | Partial customer assembly, attaching two bases to tabletop underside with included hardware | |
| Leveling adjustment | Adjustable foot pads at each base corner, 10mm adjustment travel | |
| Surface maintenance | Non-porous sealed top, wipe-clean with damp soft cloth and neutral detergent | |
| Structural rigidity | Welded one-piece pedestal frames, no folding or extendable mechanisms | |
| Anti-tip design | Wide 400mm pedestal footprint, low center of gravity from heavy stone top | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining room | Suitable for 6-seat dining configuration in modern, minimalist or luxury home interiors | |
|---|---|---|
| Open-plan kitchen dining area | Compatible with open-concept layouts, low-profile bases do not block sightlines | |
| Small commercial cafe/restaurant | Durable construction suitable for light commercial food service seating | |
| Showroom display setting | Sculptural metal base and veined marble serve as a focal statement piece | |
| Apartment rental furnishing | Fixed durable structure requires minimal maintenance for long-term tenancy use |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 15372:2008 | Furniture – Requirements for durability, strength and stability for non-domestic dining tables |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to base structural stability | |
|---|---|---|
| GB 6566-2010 | Limit of radionuclides in building materials, applicable to natural marble tabletop | |
| GB/T 4893.9-2013 | Furniture surface test for heat resistance, applicable to marble top finish |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to base structural stability; 2. GB 6566-2010: Limit of radionuclides in building materials, applicable to natural marble tabletop; 3. GB/T 4893.9-2013: Furniture surface test for heat resistance, applicable to marble top finish; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool