| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2200 x 900 x 750 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 150 kg | |
|---|---|---|
| Product net weight | 85 kg | |
| Recommended seating capacity | 6 persons | |
| Surface scratch resistance rating | 6 Mohs | |
| Surface heat resistance threshold | 1200 °C | |
| Surface stain resistance level | Grade 5 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | Polished white sintered stone, 12mm thickness, non-porous seamless surface | |
|---|---|---|
| Support columns | Matte black powder-coated carbon steel, 1.5mm wall thickness, solid rectangular profile | |
| Vertical slats | Matte black powder-coated carbon steel, 1.5mm wall thickness, flat bar profile | |
| Frame cross bracing | Matte black powder-coated carbon steel, welded connection for structural rigidity | |
| Base foot pads | Non-slip TPE rubber pads, 5mm thickness, floor-protective design | |
| Tabletop edge finish | Straight polished eased edge, no sharp corners, 1mm radius | |
| Surface coating on steel | Epoxy polyester powder coat, 60μm thickness, anti-corrosion treatment | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Fixed height design | 750mm standard dining height, compatible with 480 mm seat height dining chairs | |
|---|---|---|
| Open base design | Slatted metal framing provides unobstructed leg room for all seating positions | |
| Non-porous tabletop surface | Resists absorption of spills, requires only wiping with damp cloth for cleaning | |
| Scratch and abrasion resistant surface | Withstands daily use from cutlery, crockery and decorative items without permanent marking | |
| Heat resistant tabletop | Allows direct placement of hot serving dishes and cookware without surface damage | |
| Floor protection design | Rubber foot pads prevent scuffing and scratching on hard flooring and low-pile carpet | |
| Stable dual-support base | Two separate support sections distribute weight evenly to eliminate table wobble | |
| Support column width (each solid block) | 150 mm | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Packaged tabletop carton dimensions | 2300 x 1000 x 80 mm | |
|---|---|---|
| Packaged base carton dimensions | 1300 x 700 x 200 mm | |
| Total shipping gross weight | 105 kg | |
| Total shipping volume | 0.37 CBM | |
| Required assembly time | 40 minutes | |
| 20ft container loading capacity | 52 units | |
| 40ft HQ container loading capacity | 124 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm |
Recommended spaces / users / usage modes
| Residential dining room | Suits modern minimalist, light luxury open-plan dining areas for family daily meals and small gatherings | |
|---|---|---|
| Open-plan kitchen dining zone | Fits kitchen island adjacent dining spaces, complements dark and light neutral interior palettes | |
| Small formal meeting space | Suitable for boutique office breakout rooms or client meeting areas for 6-person discussions | |
| Studio apartment dining area | Fits large open studio spaces, provides functional dining surface without visual heaviness | |
| Show home display setting | Ideal for modern residential show home staging to demonstrate contemporary dining configuration |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables, applicable for load and stability testing | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for surface resistance to cold liquids, applicable to tabletop stain testing |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural stability testing | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances, applicable to metal finish VOC testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural stability testing; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances, applicable to metal finish VOC testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
