Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1300 × 1300 × 750 mm
Overall assembled dimensions	1300 x 1300 x 750 mm
Tabletop diameter	1300 mm
Tabletop thickness	12 mm
Leg height	738 mm
Leg outer diameter (square profile)	50 mm
Leg wall thickness	1.2 mm
Knee clearance height under tabletop	720 mm
Leg inset from tabletop edge	120 mm
Foot pad diameter per leg	30 mm
Per-diner place setting width	650 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Total product net weight	45 kg
Static distributed tabletop load capacity	250 kg
Recommended maximum seating capacity	5 persons
Tabletop material Mohs hardness	8.5
Tabletop heat resistance	1200 °C
Surface scratch resistance	3x higher than natural marble
Finish durability rating	20000 abrasion cycles
Adjustable foot height adjustment range	10 mm
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Tabletop core	12mm sintered stone, white matte finish
Tabletop underside backing	10mm honeycomb MDF reinforcing layer
Support legs	Matte black powder-coated carbon steel hollow tubing
Tabletop-to-leg mounting plates	2mm thick galvanized steel, welded to leg tops
Fastener hardware	M8 hex bolts with lock washers, zinc plated
Foot pads	Non-marking TPE anti-slip adjustable glides
Leg surface finish	70μm thick matte black powder coating
Tabletop edge finish	Hand-polished eased edge, no sharp corners
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Base structure	Fixed four-point slender leg support, no rotating or extendable features
Leveling adjustment	Adjustable TPE feet rotate to compensate for uneven floor surfaces
Surface maintenance	Non-porous tabletop wipes clean with damp cloth, no sealing required
Assembly requirement	Knock-down assembly, legs attach to tabletop underside with included hardware
Floor protection	Soft TPE foot pads prevent hard metal legs from scratching hard flooring
Tabletop heat tolerance	Supports placement of hot cookware up to 1200°C without surface damage
Stain resistance	Non-porous surface resists common food and beverage stains without discoloration
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining rooms	Serves 5 diners for daily family meals and casual entertaining
Small apartment open-plan dining areas	Compact 1300mm diameter saves floor space while maintaining seating capacity
Studio kitchen breakfast areas	Standard 750mm dining height pairs with armless dining chairs for casual use
Short-term rental furnished properties	Durable scratch-resistant surface withstands high tenant turnover use
Small cafe seating areas	Modern minimalist aesthetic fits casual contemporary food service interiors

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015	Strength, durability and safety standard for domestic dining tables
EN 1022:2018	Domestic furniture seating stability test reference for table pairing

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to top backing panel
GB/T 4893.4-2013	Surface wear resistance test standard for furniture finishes
GB 18584-2001	Indoor decoration material hazardous substance limit standard for furniture

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to top backing panel;
2. GB/T 4893.4-2013: Surface wear resistance test standard for furniture finishes;
3. GB 18584-2001: Indoor decoration material hazardous substance limit standard for furniture;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · RDT-W120-BKSL

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · RDT-W120-BKSL

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · RDT-W120-BKSLOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This modern round white dining table delivers a streamlined, minimalist aesthetic defined by clean visual contrast between its smooth white circular tabletop and slender matte black metal legs. Its fixed four-leg base sits inset from the tabletop edge, creating an open, uncluttered silhouette that avoids visual bulk, with a consistent standard dining height that pairs seamlessly with most casual dining seating.
The table is built for long-term durability across high-use settings. Its 12mm white matte sintered stone tabletop carries a subtle faux marble appearance, reinforced on the underside with a honeycomb MDF layer for structural rigidity, and finished with hand-polished eased edges that eliminate sharp corners. Slender support legs are constructed from hollow carbon steel tubing, finished with a thick matte black powder coating, and affixed to the tabletop via welded galvanized steel mounting plates secured with zinc-plated lock washer hardware. Each leg terminates in a non-marking, anti-slip TPE adjustable glide.
Practical functionality is embedded into every design detail. The non-porous tabletop resists common food and beverage stains without requiring periodic sealing, and wipes clean easily with a damp cloth. It supports direct placement of hot cookware without surface damage, and offers greater scratch resistance than natural marble, with a finish tested to withstand repeated abrasion. Adjustable foot glides rotate to compensate for uneven floor surfaces, while the soft TPE pad material prevents scuffs and scratches on hard flooring. The fixed structure includes no rotating or extendable elements, delivering steady, reliable support, and ships in knock-down form for straightforward on-site assembly with all included hardware.
This table fits equally well in residential and light commercial spaces. It accommodates up to five diners, making it ideal for family dining rooms, open-plan small apartment dining zones, and studio kitchen breakfast areas. Its hardwearing, low-maintenance surface also suits furnished short-term rental properties, where it holds up to frequent tenant turnover, as well as small cafe seating areas aligned with casual contemporary interior design schemes.
Procurement teams and residential buyers should note the product ships across two cartons, with assembly taking roughly 40 minutes per unit. The fixed diameter supports consistent space planning, while the durable surface finish reduces long-term upkeep requirements for both private and commercial operators. As an unbranded model, it offers flexible styling coordination without tied design line restrictions.

Modern Round White Dining Table with Slender Black Metal Legs Specifications

Suppliers and stock