| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2200 x 1000 x 750 mm | |
|---|---|---|
| Tabletop thickness | 36 mm | |
| Under-table leg clearance height | 714 mm | |
| Pedestal width (single unit) | 400 mm | |
| Pedestal depth (single unit) | 250 mm | |
| Long side overhang per end | 300 mm | |
| Short side overhang per edge | 350 mm | |
| Central clearance between pedestals | 1100 mm | |
| Brass base trim thickness | 10 mm | |
| Pedestal wall thickness | 2 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static tabletop load capacity | 250 kg | |
|---|---|---|
| Recommended seating capacity | 8 people | |
| Product net weight | 200 kg | |
| Surface finish wear resistance (Taber) | 1000 cycles | |
| Structure service life | 10 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop slab | Polished natural marble with sealed high-gloss finish | |
|---|---|---|
| Tabletop edge detail | Slightly beveled smooth polished edge | |
| Pedestal structure | Dark mirror-finish 201 stainless steel double-panel construction | |
| Pedestal base accent | Polished brass trim strip along bottom edge | |
| Tabletop-to-base connectors | M10 stainless steel mounting bolts with anti-slip gaskets | |
| Surface sealant | Penetrating stone sealer with stain-resistant coating | |
| Base internal support | Reinforced welded steel inner frame for pedestal rigidity | |
| Floor contact pads | Non-marking rubber anti-slip pads under each pedestal | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Accommodates 8 dining chairs with unobstructed leg access on all sides | |
|---|---|---|
| Assembly requirement | Knock-down assembly requiring attachment of two pedestals to tabletop | |
| Surface maintenance | Sealed polished surface resists water and common household stains | |
| Floor protection | Non-slip rubber pads prevent floor scratches and table shifting | |
| Stability design | Dual symmetric pedestal bases eliminate wobble on level hard floors | |
| Customization option | Length and width can be adjusted to fit dining space requirements | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room | Formal dining space for 8-person household meals and family gatherings | |
|---|---|---|
| Luxury apartment living space | Open-concept dining area adjacent to living room for contemporary interiors | |
| High-end restaurant private dining room | Premium dining suite for VIP guest seating in upscale hospitality venues | |
| Executive lounge dining area | Staff and guest dining space in premium office buildings | |
| Show home display | Feature furniture piece for luxury residential real estate showrooms |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic dining tables, structural performance reference | |
|---|---|---|
| EN 15186:2006 | Furniture – Test for surface resistance to cold liquids, applicable to stone finish stain resistance checks | |
| EN 1022:2018 | Furniture – Seating – Determination of stability, reference for matched dining chair stability |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to furniture hardware and structural safety verification | |
|---|---|---|
| GB 6566-2010 | Limit of radionuclides in building materials, applicable to natural stone tabletop radiation safety testing | |
| GB/T 4893.9-2013 | Furniture surface test for heat resistance, applicable to stone tabletop finish performance verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to furniture hardware and structural safety verification; 2. GB 6566-2010: Limit of radionuclides in building materials, applicable to natural stone tabletop radiation safety testing; 3. GB/T 4893.9-2013: Furniture surface test for heat resistance, applicable to stone tabletop finish performance verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
