| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 1800 x 900 x 750 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Under-table knee clearance height | 680 mm | |
| Long side legroom depth | 450 mm | |
| End side legroom width | 1200 mm | |
| Metal base tubing wall thickness | 1.5 mm | |
| Floor stretcher cross-section | 50 x 30 mm | |
| Tabletop edge overhang | 50 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Table net weight | 65 kg | |
|---|---|---|
| Distributed static tabletop load capacity | 150 kg | |
| Recommended seating capacity | 6 people | |
| Powder coating corrosion resistance | 500 hours | |
| Stone surface scratch resistance | 6 Mohs | |
| Surface heat resistance | 1200 °C | |
| Frame joint static load rating | 1000 N | |
| Product warranty period | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface material | White veined sintered stone | |
|---|---|---|
| Tabletop substrate material | High-density fiberboard backing | |
| Base frame material | Matte black powder-coated carbon steel | |
| Floor contact pads | Polypropylene non-slip glides | |
| Hardware connectors | Zinc-plated steel bolts and cam locks | |
| Base finish coating thickness | 80 um | |
| Frame weld treatment | Ground and smoothed weld joints | |
| Surface sealer | Food-safe nano-coating | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Base support structure | Dual end trestles with central horizontal floor stretcher | |
|---|---|---|
| Leveling adjustment | Threaded glide feet at each base contact point | |
| Assembly requirement | Knock-down assembly with included hex key and hardware | |
| Surface maintenance | Non-porous wipe-clean surface | |
| Weight distribution | Even load transfer across four floor contact points | |
| Seating access | Open base design allows chair placement on all four sides | |
| Angled leg outward tilt angle | 12 degrees | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential dining room use | Seats 6 people for daily family meals and casual entertaining | |
|---|---|---|
| Open-plan kitchen dining space | Minimalist high-contrast design complements modern kitchen interiors | |
| Small restaurant or cafe seating | Durable stone surface withstands frequent commercial dining use | |
| Apartment dining area | 1800mm length fits most urban apartment dining nooks without overcrowding | |
| Show home display configuration | Matte black and white finish matches modern luxury interior staging trends |
EU Market Access Requirements* EN Standards
| Domestic furniture safety standard | EN 12521:2015 | |
|---|---|---|
| Surface resistance to cold liquids | EN 12720:2009+A1:2013 | |
| Furniture structural strength test | EN 1730:2012 |
Standards applicable to China-market projects
| Table stability test standard | GB/T 10357.7 | |
|---|---|---|
| Table surface physical property standard | GB/T 17657 | |
| Metal furniture coating standard | GB/T 3325 |
This product must meet the following technical requirements: 1. Table stability test standard: GB/T 10357.7; 2. Table surface physical property standard: GB/T 17657; 3. Metal furniture coating standard: GB/T 3325; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
