Primary source
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1800 × 900 × 750 mm | |
|---|---|---|
| Tabletop thickness | 30 mm | |
| Rounded corner radius | 50 mm | |
| Pedestal footprint (each) | 400 x 200 mm | |
| Under-table knee clearance height | 710 mm | |
| Pedestal setback from table ends | 200 mm | |
| Long-side leg clearance between pedestals | 1000 mm | |
| Edge profile thickness (polished) | 30 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Static distributed tabletop load | 150 kg | |
|---|---|---|
| Seating capacity | 6 persons | |
| Surface heat resistance | 1200 °C | |
| Surface Mohs hardness | 6 | |
| Net product weight | 85 kg | |
| Warranty period | 2 years | |
| Surface stain resistance rating | Level 5 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop surface layer | 12mm veined white sintered stone | |
|---|---|---|
| Tabletop backing substrate | 18mm high-density MDF reinforcement | |
| Pedestal frame | 1.5mm thick matte dark carbon steel | |
| Base internal bracing | Square steel tube cross supports | |
| Tabletop edge finish | Polished rounded sintered stone match | |
| Base coating | Matte powder coat, rust-resistant | |
| Connection hardware | M8 zinc-plated steel bolts | |
| Floor protection pads | 5mm thick non-slip rubber pads | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Height configuration | Fixed 750mm standard dining height | |
|---|---|---|
| Extendability | Non-extendable fixed rectangular top | |
| Surface cleanability | Wipe-clean non-porous surface | |
| Stability design | Dual end pedestal weight distribution | |
| Seating access | Unobstructed leg room on all four sides | |
| Assembly requirement | Knock-down flat-pack assembly | |
| Edge safety | Rounded anti-collision corners | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential dining room use | Seats 6people for daily family meals and casual gatherings | |
|---|---|---|
| Small open-plan kitchen dining area | Compact pedestal base maximizes leg room without blocking sightlines | |
| Modern apartment dining nook | Contemporary light luxury finish matches neutral and minimalist interiors | |
| Light commercial cafe seating | Durable stone surface withstands frequent daily use in public spaces | |
| Recommended pairing | Matches upholstered armless dining chairs with slim tapered legs for cohesive look | |
| Surface use case | Heat-resistant top supports hot serving dishes without additional trivets |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic dining tables | |
|---|---|---|
| EN 13722:2004 | Furniture – Test methods for surface resistance to cold liquids | |
| EN 15185:2011 | Furniture – Test for assessment of surface resistance to abrasion |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to substrate and assembly | |
|---|---|---|
| GB/T 4893.4-2013 | Surface abrasion resistance test for furniture finishes, applicable to tabletop | |
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable to substrate materials |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to substrate and assembly; 2. GB/T 4893.4-2013: Surface abrasion resistance test for furniture finishes, applicable to tabletop; 3. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to substrate materials; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool