| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 3500 x 1100 x 900 mm | |
|---|---|---|
| Seat height from floor | 450 mm | |
| Seat depth (clear sitting surface) | 700 mm | |
| Seat cushion thickness | 220 mm | |
| Backrest total height | 550 mm | |
| Armrest width (each end) | 280 mm | |
| Armrest height from seat surface | 180 mm | |
| Base plinth height | 120 mm | |
| Single seat cushion width | 980 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total static load capacity | 400 kg | |
|---|---|---|
| Product net weight | 200 kg | |
| Seat foam density | 60D | |
| Seat foam rebound rate | 60% | |
| Leather abrasion resistance | 50000 cycles | |
| Frame structural service life | 20 years | |
| Seam stitch pitch | 30 mm | |
| Individual seat static load | 120 kg | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Upholstery contact surface | 2.2mm thick top-grain black full-grain leather | |
|---|---|---|
| Internal structural frame | Kiln-dried solid pine wood with glued/nailed corner blocking | |
| Seat support system | 80mm sinuous springs paired with 50mm elastic webbing | |
| Seat cushion core fill | Multi-layer high-resilience foam with 4cm natural latex top layer | |
| Backrest cushion fill | 30D high-resilience foam wrapped in 200g soft polyester fiber | |
| Base plinth structure | Pine wood frame wrapped in matching black leather | |
| Armrest internal structure | Solid pine framing padded with 40mm high-resilience foam | |
| Upholstery stitching thread | High-tenacity bonded polyester thread | |
| Base bottom contact layer | 5mm thick anti-slip felt pads applied across full plinth contact area | |
| Backrest tufting hardware | Corrosion-resistant zinc-plated steel tufting buttons with leather covers | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
| Recline adjustment | No reclining mechanism, fixed backrest angle at 105 degrees | |
|---|---|---|
| Seating configuration | Fixed linear four-seat layout with three segmented seat cushions | |
| Assembly requirement | Fully assembled factory-finished unit, no on-site assembly needed | |
| Cushion design | Removable seat and back cushions for cleaning access | |
| Structural stability | Low center of gravity from grounded block base, anti-slip felt pads on base bottom | |
| Customization compatibility | Supports custom length and full-wrap leather upgrade options | |
| Floor protection | Full-surface anti-slip felt pads prevent floor scuffing and sliding | |
| Leather maintenance | Surface-compatible with standard leather conditioner and cleaning products | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Residential living room primary seating | Serves as main four-person seating for open-plan modern living spaces | |
|---|---|---|
| Luxury home lounge / media room | Low-profile deep-seat design supports extended relaxed seating use | |
| High-end executive office reception area | Premium black leather finish matches formal professional reception spaces | |
| Modern minimalist interior design schemes | Clean linear silhouette complements monochrome contemporary decor styles | |
| Large open-plan apartment seating | 3.5m length fits wide wall spaces for multi-person casual seating | |
| Recommended pairing | Matched with low-profile marble or wood coffee table 400mm seat pitch | |
| Open-plan residential living room primary seating | Serves as main four-person seating for modern minimalist living spaces | |
| Luxury home lounge or media room | Low-profile deep-seat design supports extended relaxed seating for viewing |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Applicable for domestic seating strength, durability and safety requirements | |
|---|---|---|
| EN 1021-1:2014 | Applicable for upholstered furniture cigarette ignition resistance testing | |
| EN 1334:2022 | Applicable for upholstered furniture seam strength performance requirements |
Standards applicable to China-market projects
| GB/T 1952.1-2012 | Applicable for sofa mechanical safety and durability performance acceptance | |
|---|---|---|
| GB 20400-2006 | Applicable for leather upholstery harmful substance limit acceptance | |
| GB/T 3324-2017 | Applicable for wood frame structural dimension tolerance acceptance | |
| GB/T 16799-2008 | Applicable for furniture leather material quality and grading acceptance |
This product must meet the following technical requirements: 1. GB/T 1952.1-2012: Applicable for sofa mechanical safety and durability performance acceptance; 2. GB 20400-2006: Applicable for leather upholstery harmful substance limit acceptance; 3. GB/T 3324-2017: Applicable for wood frame structural dimension tolerance acceptance; 4. GB/T 16799-2008: Applicable for furniture leather material quality and grading acceptance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
