| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 3200 x 1050 x 820 mm | |
|---|---|---|
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total weight | 125 kg | |
|---|---|---|
| Total static load capacity | 480 kg | |
| Seat foam density | 40 kg/m³ | |
| Backrest foam density | 28 kg/m³ | |
| Foam indentation load deflection | 35 N | |
| Upholstery abrasion resistance | 50000 Martindale cycles | |
| Design capacity | 4 adults | |
| Total product weight | 125 kg | |
| Seam tensile strength | 180 N | |
| Design occupancy | 4 adults |
Core acceptance fields · Panels / hardware / frame / upholstery
| External upholstery | Textured navy blue chenille fabric | |
|---|---|---|
| Internal frame | Kiln-dried solid pine hardwood | |
| Seat cushion core | High-resilience polyurethane foam wrapped in 30mm down blend | |
| Backrest padding | Dacron-wrapped soft polyurethane foam | |
| Armrest construction | Padded integrated curved arm with 12mm plywood substrate | |
| Support legs | Polished stainless steel concealed low-profile legs | |
| Seam construction | Double-stitched reinforced seams with 8mm stitch pitch | |
| Included throw pillows | 1 striped woven cotton pillow, 1 rust orange linen-blend pillow | |
| Internal load-bearing frame | Kiln-dried solid pine, 28 mm section thickness, 12% maximum moisture content | |
| Seat support system | 80 mm sinuous steel springs with 50 mm spacing, overlaid polypropylene webbing | |
| Armrest substrate | 12 mm curved plywood form, padded with 40 mm polyurethane foam | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Four fixed individual seat positions with integrated curved arms | |
|---|---|---|
| Back support | Continuous curved padded backrest with lumbar contour | |
| Surface stability | Low-profile recessed legs prevent tipping and reduce floor damage | |
| Decorative accessory compatibility | Accommodates two 500mm throw pillows without reducing usable seat width | |
| Floor protection | Concealed legs with felt glide pads | |
| Cleaning access | Fixed non-removable upholstery covers suitable for professional fabric cleaning | |
| Modular alignment | Three connected frame sections joined with heavy-duty metal brackets | |
| Structural stability | Wide low-profile base with recessed leg placement reduces forward/side tipping | |
| Upholstery maintenance | Fixed non-removable cushion covers, compatible with professional low-moisture fabric cleaning | |
| Frame assembly | Three connected frame sections joined with heavy-duty 2 mm steel corner brackets | |
| Edge comfort | Rounded padded arm and seat front edges eliminate hard pressure points | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Largest carton dimensions | 2200 x 800 x 650 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Open-plan residential living rooms | Serves as primary seating for 4 adults during casual gatherings or media viewing | |
|---|---|---|
| Modern apartment lounge spaces | Low-profile 3200mm width fits standard wall lengths without overwhelming compact floor plans | |
| Residential reception areas | Streamlined navy finish coordinates with neutral decor for semi-formal guest seating | |
| Open loft living spaces | Wide seating bay supports relaxed lounging alongside low-profile coffee table configurations | |
| Family media rooms | 50000 Martindale abrasion rating withstands daily use from household members and pets |
EU Market Access Requirements* EN Standards
| EN 12520 | 2015 Furniture - Strength, durability and safety for domestic seating: Applies to static load and structural stability verification | |
|---|---|---|
| EN 71-3 | 2019 Safety of toys - Migration of certain elements: Applies if used in family spaces with child access |
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applies to solid wood frame structural integrity for residential acceptance | |
|---|---|---|
| GB 18401-2010 National general safety technical code for textile products | Applies to upholstery fabric formaldehyde and colorfastness limits | |
| GB/T 1952.1-2012 Sofas | Applies to sofa dimensional tolerance, load, and durability performance for procurement inspection |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applies to solid wood frame structural integrity for residential acceptance; 2. GB 18401-2010 National general safety technical code for textile products: Applies to upholstery fabric formaldehyde and colorfastness limits; 3. GB/T 1952.1-2012 Sofas: Applies to sofa dimensional tolerance, load, and durability performance for procurement inspection; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
