| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2800 x 1400 x 800 mm | |
|---|---|---|
| Seat height from floor | 450 mm | |
| Seat depth (main seating zone) | 700 mm | |
| Seat depth (extended chaise end) | 1400 mm | |
| Backrest height above seat | 350 mm | |
| Rounded end cap radius (both terminals) | 350 mm | |
| Throw pillow dimensions | 450 x 450 mm | |
| Piping width along upholstery seams | 8 mm | |
| Gold-tone support foot height | 20 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total static weight capacity | 476 kg | |
|---|---|---|
| Seating capacity | 4 persons | |
| Cushion foam density | 45 kg/m³ | |
| Cushion foam rebound rate | 60% | |
| Fabric abrasion resistance (Martindale) | 40000 cycles | |
| Minimum required entry door width | 800 mm | |
| Seam stitch pitch | 3 stitches per cm | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer upholstery | Light beige matte woven polyester fabric | |
|---|---|---|
| Inner structural frame | Kiln-dried solid hardwood + 18mm plywood panels | |
| Cushion support core | 80mm pocket spring unit topped with high-density foam | |
| Backrest fill | 30kg/m³ soft polyurethane foam with polyester fiber wrap | |
| Throw pillow fill | 100% blown polyester fiberfill | |
| Seam detailing | Contrast fabric piping along all upholstery panel edges | |
| Support feet | Gold-tone polished metal small disc feet | |
| Base enclosure | Upholstered fabric-wrapped block base | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg | |
| Reference Upholstery Color Count | Recommended 8fabric/leather color options |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed asymmetric two-section curved layout | |
|---|---|---|
| Back support | Integrated continuous curved backrest aligned to seat arc | |
| Throw pillow placement | 4 matching square pillows positioned along backrest | |
| Segment connection | Hidden metal locking brackets join the two sofa sections | |
| Floor protection | Small metal feet fitted with non-slip felt pads | |
| Edge design | Fully rounded closed end caps on both terminals | |
| Upholstery maintenance | Removable cushion covers with hidden zipper closures | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Residential living room placement | Centered in open-plan living areas as a statement lounge seating piece | |
|---|---|---|
| Modern office reception areas | Placed in lobby or guest waiting zones for a contemporary upscale aesthetic | |
| Luxury hotel lounge spaces | Used in suite sitting areas or club lounges for premium guest comfort | |
| Open concept loft spaces | Positioned to zone open floor plans without blocking sightlines | |
| Design studio waiting areas | Selected for creative workspaces to convey modern minimalist design taste |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture - Strength, durability and safety for domestic seating | |
|---|---|---|
| EN 1021-1:2014 | Furniture - Upholstered furniture ignition resistance (smouldering cigarette) |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture | |
|---|---|---|
| GB 18401-2010 | National general safety technical code for textile products | |
| GB/T 1952.1-2012 | Test methods for sofas |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture; 2. GB 18401-2010: National general safety technical code for textile products; 3. GB/T 1952.1-2012: Test methods for sofas; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
