| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions (W × D × H) | 2800 × 1200 × 750 mm | |
|---|---|---|
| Seat height from floor | 450 mm | |
| Seat depth at widest central point | 700 mm | |
| Backrest height above seat surface | 300 mm | |
| Minimum footprint clearance required | 2900 × 1300 mm | |
| Inner seating arc length (usable seat width) | 2400 mm | |
| Base plinth height (floor contact section) | 80 mm | |
| Cushion thickness (seat core) | 220 mm | |
| Backrest cushion thickness | 180 mm | |
| Throw pillow dimensions (included) | 450 × 450 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total static weight capacity | 400 kg | |
|---|---|---|
| Product net weight | 110 kg | |
| Seating capacity | 4 adults | |
| Fabric Martindale abrasion resistance | 50000 double rubs | |
| Foam density (seat core) | 45 kg/m³ | |
| Foam density (backrest) | 30 kg/m³ | |
| Foam rebound rate | 60% | |
| Seam stitch pitch | 8 stitches per 30mm | |
| Structural frame warranty | 3 years | |
| Fabric and upholstery warranty | 1 year |
Core acceptance fields · Panels / hardware / frame / upholstery
| Upholstery fabric | 280gsm cream white boucle (nubby textured looped fabric) | |
|---|---|---|
| Internal structural frame | Kiln-dried solid pine wood | |
| Seat cushion filling | High density polyurethane foam | |
| Backrest filling | Medium density polyurethane foam with polyester fiber wrap | |
| Base plinth construction | Plywood support frame fully wrapped in matching boucle fabric | |
| Curved frame reinforcement | Metal corner brackets at arc joints | |
| Seat support system | Elastic webbing suspension (80mm wide, spaced 50mm apart) | |
| Included throw pillow cover | Matching deep red textured woven fabric | |
| Underside floor protection | Non-slip non-marking felt pads | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Continuous integrated curved seating surface, no separate seat/back cushions or armrests | |
|---|---|---|
| Recline functionality | Fixed non-reclining structure, no adjustable tilt or mechanism components | |
| Cover removability | Fixed non-removable upholstery covers, tailored stitched directly to frame | |
| Mobility | Stationary floor-placed design, no casters or glides; light repositioning possible for 2 adults | |
| Configuration flexibility | Standalone freeform piece, not compatible with modular sectional connectors | |
| Floor clearance design | Near-zero floor gap under base, prevents dust accumulation under unit and creates a sleek monolithic look | |
| Maintenance requirement | Spot clean only with fabric-appropriate upholstery cleaner, no machine washing permitted | |
| Customization support | Custom length, fabric color and throw pillow quantity available per OEM supplier standard | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Shipping carton dimensions (L × W × H) | 2900 × 1300 × 850 mm | |
|---|---|---|
| Gross shipping weight | 140 kg | |
| Packaging volume (CBM) | 3.21 CBM | |
| Assembly time required on site | 10 minutes | |
| 20ft GP container loading quantity | 6 units | |
| 40ft HQ container loading quantity | 16 units | |
| Packaging materials | 5mm thick corrugated export carton, 20mm EPE foam wrap, corner protective cardboard, plastic stretch wrap | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm |
Recommended spaces / users / usage modes
| Residential living room seating | Ideal for modern, wabi-sabi, minimalist or cream-style home living rooms as a statement primary seating piece, fits open plan lounge layouts with its soft curved silhouette | |
|---|---|---|
| Commercial lounge and reception areas | Suitable for high-end beauty salons, boutique hotel lobbies, designer studio waiting areas and creative office breakout spaces to create a welcoming soft seating zone | |
| Small to medium open plan spaces | Armless low-profile design creates less visual obstruction than bulkier armed sofas, suitable for apartments or loft spaces where open sightlines are desired | |
| Complementary seating configuration | Pairs with rounded boucle ottomans, curved area rugs, minimalist travertine or white side tables, and textured 3D wall panels to complete a cohesive organic modern interior scheme | |
| Placement notes | Requires flat level floor surface; not recommended for high-moisture outdoor areas as boucle fabric is not treated for outdoor water or UV resistance | |
| User suitability | Designed for adult casual lounge seating; plump 450mm seat height provides comfortable support for users between 155cm and 185cm tall for extended sitting | |
| Color matching recommendation | Standard cream white finish coordinates with neutral wall tones (warm grey, off-white, beige) and accent colors including burgundy, terracotta, sage green or charcoal soft furnishings | |
| Placement requirements | Requires flat level floor surface with maximum 2mm per meter slope; not recommended for high-moisture outdoor areas as boucle fabric is not treated for outdoor water or UV resistance |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture - Strength, durability and safety - Requirements for domestic seating, applicable for structural safety and performance verification for residential use | |
|---|---|---|
| EN 1021-1:2014 | Furniture - Assessment of ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette, recommended fire safety standard for residential upholstery | |
| EN 71-3:2019 | Safety of toys - Migration of certain elements, applicable if sofa is specified for children's residential spaces, to test for harmful heavy metal content in materials |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to solid wood frame structural strength and dimensional stability checks for procurement acceptance | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde emission testing of frame and plywood components | |
| GB/T 1952.1-2012 | Strength and durability test for sofas, applicable for static load, fatigue and impact performance acceptance testing of seating structure | |
| GB 18401-2010 | National general safety technical code for textile products, applicable for formaldehyde, pH and colorfastness testing of boucle upholstery fabric |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood frame structural strength and dimensional stability checks for procurement acceptance; 2. GB 18584-2001: Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde emission testing of frame and plywood components; 3. GB/T 1952.1-2012: Strength and durability test for sofas, applicable for static load, fatigue and impact performance acceptance testing of seating structure; 4. GB 18401-2010: National general safety technical code for textile products, applicable for formaldehyde, pH and colorfastness testing of boucle upholstery fabric; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
