| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2870 x 1040 x 1030 mm | |
|---|---|---|
| Seat height from floor | 490 mm | |
| Seat depth per position | 600 mm | |
| Total usable seat width | 2260 mm | |
| Armrest height from floor | 770 mm | |
| Backrest height above seat | 540 mm | |
| Armrest width | 260 mm | |
| Support foot height | 50 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Per-seat weight capacity | 136 kg | |
|---|---|---|
| Total sofa static weight capacity | 408 kg | |
| Upholstery abrasion resistance | 20000 cycles | |
| Cushion foam density | 45 kg/m³ | |
| Foam rebound rate | 60% | |
| Maximum recline angle from upright | 160° | |
| Frame static load warranty period | 10 years | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer upholstery | 1.2mm thick black faux leather, channel-tufted stitching | |
|---|---|---|
| Seat cushion fill | 45kg/m³ high-density polyurethane foam wrapped in polyester fiber | |
| Back cushion fill | 35kg/m³ soft polyurethane foam blended with polyester fiberfill | |
| Internal frame | Kiln-dried solid wood reinforced with 15mm plywood and steel brackets | |
| Recliner mechanism | 2mm thick cold-rolled steel frame with welded joints | |
| Support feet | Injection-molded black plastic with non-slip floor pads | |
| Seam construction | Stitched with bonded polyester thread, 30mm stitch pitch | |
| Armrest padding | 25mm thick foam layer over padded arm frame, soft rolled edge | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg | |
| Reference Upholstery Color Count | Recommended 8fabric/leather color options |
Adjustment / rotation / tilt / mobility / storage features
| Recline operation | Independent per-seat recline with integrated footrest extension | |
|---|---|---|
| Recline locking | Infinite position lock between upright and 160° full recline | |
| Footrest activation | Synchronized extension with backrest recline for leg support | |
| Wall proximity design | Requires 150mm rear clearance to fully recline without wall contact | |
| Armrest utility | Padded fixed armrests provide stable upper body support when seated | |
| Cushion retention | Segmented seat and back cushions secured to frame to prevent shifting | |
| Floor protection | Non-slip foot pads prevent scuffing and sliding on hard flooring | |
| Minimum wall clearance for recline | 150 mm | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Residential living room main seating | Seats three adults comfortably for daily lounge and media use | |
|---|---|---|
| Home theater seating | Recline function supports relaxed viewing positions for extended sessions | |
| Apartment open-plan lounge | Low-profile blocky silhouette fits modern contemporary interior decor schemes | |
| Executive lounge break area | Durable faux leather surface supports regular commercial break space use | |
| Basement recreation room | Stain-resistant black upholstery is suited for casual high-traffic use |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Domestic furniture seating strength, durability and safety requirements | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture ignitability resistance for smouldering cigarette source | |
| EN 13356:2009 | Upholstery leather abrasion resistance testing specification |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal frame construction | |
|---|---|---|
| GB/T 1952.1-2012 | Sofas standard, applicable to seating safety, durability and dimensional tolerance | |
| GB 18584-2001 | Limit of harmful substances for wooden furniture, applicable to formaldehyde emission control | |
| GB/T 39221-2020 | Upholstered furniture leather performance requirements, applicable to faux leather upholstery |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal frame construction; 2. GB/T 1952.1-2012: Sofas standard, applicable to seating safety, durability and dimensional tolerance; 3. GB 18584-2001: Limit of harmful substances for wooden furniture, applicable to formaldehyde emission control; 4. GB/T 39221-2020: Upholstered furniture leather performance requirements, applicable to faux leather upholstery; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
