| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2400 x 1600 x 800 mm | |
|---|---|---|
| Seat height from floor | 300 mm | |
| Seat depth per seating position | 700 mm | |
| Seat width per seating position | 800 mm | |
| Backrest height above seat | 500 mm | |
| Side bolster thickness | 250 mm | |
| Seat cushion depression depth | 200 mm | |
| Corner module footprint | 780 x 780 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Product net weight | 75 kg | |
|---|---|---|
| Total static seating load capacity | 360 kg | |
| Recommended user capacity | 3 people | |
| Seat foam density | 45 kg/m³ | |
| Foam rebound rate | 60% | |
| Upholstery fabric Martindale abrasion resistance | 30000 cycles | |
| Seam stitch pitch | 8 mm | |
| Foam full rebound time after unpacking | 72 hours | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Upholstery fabric | 3D quilted textured navy blue velvet | |
|---|---|---|
| Seat fill material | High-density polyurethane foam block | |
| Backrest fill material | Blended high-density foam and fiber fill | |
| Side bolster fill material | High-resilience foam wrap | |
| Internal structural core | Reinforced flexible foam matrix | |
| Stitching material | High-tensile polyester thread | |
| Base contact surface | Non-slip woven polyester fabric | |
| Quilted batt filler | 200g polyester wadding | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg | |
| Reference Upholstery Color Count | Recommended 8fabric/leather color options |
Adjustment / rotation / tilt / mobility / storage features
| Modular configuration | Connected L-shaped corner layout | |
|---|---|---|
| Floor-level seating | Legless zero-clearance design | |
| Upholstery care | Spot clean with mild upholstery detergent | |
| Compressed packaging recovery | Vacuum-compressed shipping design | |
| Multi-directional support | Integrated back and side bolsters | |
| Noise-free construction | No internal rigid frame or metal hardware | |
| Reconfigurable potential | Detachable modular segments | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Shipping carton dimensions | 1250 x 850 x 600 mm | |
|---|---|---|
| 20ft GP container loading quantity | 42 units | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Residential living rooms | Casual lounge seating for small apartments or open-plan lounge spaces | |
|---|---|---|
| Home media rooms | Low-profile plush seating for relaxed movie and entertainment viewing | |
| Loft and studio apartments | Space-efficient corner seating that fits open, minimal interior layouts | |
| Boutique lounge areas | Soft decorative seating for boutique cafes, co-working break spaces, or hotel lobbies | |
| Teen or children’s bedrooms | Rounded edge design eliminates sharp corners for safer casual seating | |
| Reading nooks | Deep plush seat and back support for extended seated reading and relaxation |
EU Market Access Requirements* EN Standards
| EN 1022:2018 | Domestic furniture seating stability test standard for structural safety validation | |
|---|---|---|
| EN 13759:2011 | Upholstered furniture resistance to fatigue loading for long-term use durability | |
| EN 14362-1:2012 | Textile azo colorant testing to restrict harmful chemical content in upholstery |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2020 | Lounge seating performance standard for commercial-grade load and durability testing | |
|---|---|---|
| ANSI/BIFMA X7.1-2020 | Standard for formaldehyde and VOC emissions from furniture components for indoor air quality |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural performance verification | |
|---|---|---|
| GB 18401-2010 | National general safety technical code for textile products, formaldehyde and harmful substance limits | |
| GB/T 19817-2005 | Upholstered furniture fabric performance requirements, abrasion and colorfastness testing | |
| GB 20286-2006 | Fire performance requirements for upholstered furniture in public and residential spaces |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural performance verification; 2. GB 18401-2010: National general safety technical code for textile products, formaldehyde and harmful substance limits; 3. GB/T 19817-2005: Upholstered furniture fabric performance requirements, abrasion and colorfastness testing; 4. GB 20286-2006: Fire performance requirements for upholstered furniture in public and residential spaces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
