| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 900 x 900 x 470 mm | |
|---|---|---|
| Tabletop diameter | 900 mm | |
| Tabletop thickness | 32 mm | |
| Tabletop edge radius | 15 mm | |
| Base outer diameter | 880 mm | |
| Floor clearance under base | 120 mm | |
| Split base cutout height | 150 mm | |
| Support foot contact width | 220 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net product weight | 30 kg | |
|---|---|---|
| Distributed tabletop static load | 105 kg | |
| Center point concentrated load | 25 kg | |
| Stone top water absorption rate | 0.3% | |
| Finish abrasion resistance | 4000 cycles | |
| Stability tilt threshold | 15 degrees | |
| Finish coating thickness | 12 μm | |
| Stone substrate moisture content | 8% | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | Polished white natural marble | |
|---|---|---|
| Tabletop edge trim | Matching satin brass metal | |
| Base structural material | 1.5mm thick cold-rolled steel | |
| Base surface finish | Satin brass electroplated coating | |
| Anti-slip foot pads | 8mm thick rubber pads | |
| Tabletop backing board | 12mm thick plywood reinforcement | |
| Assembly hardware | M8 zinc-plated steel bolts | |
| Tabletop surface | Polished sealed white natural marble with subtle grey veining | |
| Tabletop reinforcement | 12mm thick plywood backing board | |
| Base core structure | 1.5mm thick cold-rolled steel tube/formed sheet | |
| Foot protection pads | 8mm thick non-marking rubber pads | |
| Assembly fasteners | M8 zinc-plated steel hex bolts |
Adjustment / rotation / tilt / mobility / storage features
| Surface function | Smooth non-porous sealed top for placing beverages, decor and reading materials | |
|---|---|---|
| Assembly structure | Detachable two-part construction (top + base) for transport | |
| Stability design | Three split sculptural base segments for even weight distribution | |
| Floor protection | Integrated rubber foot pads on each base contact point | |
| Edge safety | Fully rounded eased tabletop edge profile | |
| Under-table clearance | 120mm open floor gap under base | |
| Surface utility | Smooth non-porous sealed top holds beverages, decor and reading materials | |
| Assembly design | Two-part detachable construction (top + base) for flat transport | |
| Stability engineering | Three evenly spaced split sculptural feet for even weight distribution | |
| Under-base clearance | 120mm open floor gap under the full base perimeter | |
| Structural connection | Six evenly spaced M8 bolt mounting points between top and base | |
| Finish performance | Fingerprint-resistant satin brass base finish |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Style matching | Pairs with contemporary, minimalist, art-deco and light luxury interior schemes | |
|---|---|---|
| Supporting use case | Suitable for placement in boutique hotel lobbies and executive lounge seating areas | |
| Recommended surrounding furniture | Pairs with curved boucle sofas, sculptural accent chairs and low-pile area rugs | |
| User group recommendation | Ideal for homeowners and commercial designers specifying curated lounge seating zones | |
| Residential living room use | Ideal as center table in open-plan living spaces paired with curved sofas | |
| Commercial lounge application | Suitable for boutique hotel lobbies, high-end office breakout areas and executive lounges | |
| Style pairing guidance | Works with contemporary, minimalist, art deco and light luxury interior palettes | |
| Furniture coordination | Pairs with curved accent chairs, low-pile textured area rugs and minimalist floor lighting |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Safety, strength and durability requirements for domestic furniture tables | |
|---|---|---|
| EN 15187:2007 | Test method for assessment of furniture surface light fastness | |
| EN 1730:2000 | Test methods for table stability, strength and durability | |
| EN 13722:2004 | Test method for assessment of furniture surface stain resistance |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to stone-top assembly testing | |
|---|---|---|
| GB/T 4893.4-2013 | Surface wear resistance test method for furniture finishes | |
| GB/T 4893.9-2013 | Surface impact resistance test method for furniture finishes | |
| GB/T 17657-2013 | Test methods for physical and chemical properties of wood-based panels |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to stone-top assembly testing; 2. GB/T 4893.4-2013: Surface wear resistance test method for furniture finishes; 3. GB/T 4893.9-2013: Surface impact resistance test method for furniture finishes; 4. GB/T 17657-2013: Test methods for physical and chemical properties of wood-based panels; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
