| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 3255 x 1630 x 845 mm | |
|---|---|---|
| Seat height from floor | 470 mm | |
| Seat depth at widest point | 715 mm | |
| Arm height above seat | 178 mm | |
| Backrest height above seat | 375 mm | |
| Minimum entry clearance for delivery | 813 mm | |
| Individual seating width per position | 813 mm | |
| Foot height clearance from floor | 64 mm | |
| Throw pillow dimensions (included) | 508 x 508 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total static weight capacity | 544 kg | |
|---|---|---|
| Seat cushion foam density | 40 kg/m³ | |
| Back cushion foam density | 32 kg/m³ | |
| Foam rebound rate | 60% | |
| Fabric abrasion resistance (Martindale) | 30000 cycles | |
| Seat support spring gauge | 3.6 mm sinuous spring | |
| Net product weight | 122 kg | |
| Seam stitching pitch | 8 stitches per 30 mm | |
| Per-seat static load rating | 181 kg | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Internal frame | Kiln-dried solid hardwood with corner-blocked joinery | |
|---|---|---|
| Seat support system | Sinuous steel spring base with polypropylene webbing overlay | |
| Seat cushion fill | High-resilience polyurethane foam wrapped in polyester fiber | |
| Backrest construction | Button-tufted textured woven polyester upholstery over shaped foam | |
| Integrated arms | Continuous curved upholstered frame matching seat/back upholstery | |
| Support feet | Low-profile dark stained solid wood block feet | |
| Accent pillow fill | Blown polyester fiber fill in removable woven covers | |
| Upholstery fabric weight | 400 g/m² textured woven polyester | |
| Seat cushion thickness | 200 mm | |
| Backrest foam thickness | 150 mm | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Continuous curved 3-position lounge seating without divided seat cushions | |
|---|---|---|
| Tufted back support | Deep button tufting secures back fill to prevent shifting over use | |
| Arm support | Integrated wrap-around arms provide continuous side support along full curve | |
| Delivery configuration | Fully assembled upholstered unit requiring only foot attachment if needed | |
| Upholstery care | Spot clean with mild detergent and damp soft cloth; avoid harsh chemicals | |
| Stability design | Low center of gravity from deep curved base prevents tipping during use | |
| Upholstery maintenance | Spot clean only with pH-neutral mild detergent and damp lint-free soft cloth; avoid bleach and solvent-based cleaners | |
| Stability engineering | 715 mm overall depth and low 64 mm foot height create a low center of gravity to prevent tipping under eccentric load | |
| Non-slip protection | Felt floor protection pads on each foot prevent hard floor scratching and unwanted sliding during use | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Residential living rooms | Statement seating for modern, organic, or wabi-sabi design schemes | |
|---|---|---|
| Open concept lounge spaces | Curved form creates soft visual division without blocking sightlines | |
| Boutique hotel lobbies | Design-forward seating for high-end guest reception areas | |
| Studio apartment seating | Low-profile curved silhouette works in compact open-plan layouts | |
| Home media rooms | Deep plush cushioning supports extended seated lounging | |
| High-end residential lounges | Plush deep cushioning supports 3+ hours of continuous casual seated lounging | |
| Luxury apartment open plans | Low-profile curved silhouette fits compact open-plan layouts without overwhelming space | |
| Executive breakout areas | Casual collaborative seating for informal office team discussion zones |
EU Market Access Requirements* EN Standards
| EN 1725:1998 | Domestic furniture – Seating – Safety requirements, applicable for residential use | |
|---|---|---|
| EN 1022:2018 | Domestic furniture – Seating – Determination of stability |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal wood frame | |
|---|---|---|
| GB 18401-2010 | National textile safety technical code, applicable to upholstery fabric | |
| GB/T 1952.1-2012 | Test methods for sofas, applicable to seating durability and load testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal wood frame; 2. GB 18401-2010: National textile safety technical code, applicable to upholstery fabric; 3. GB/T 1952.1-2012: Test methods for sofas, applicable to seating durability and load testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
