| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| 3-seat sofa overall dimensions | 2170 x 965 x 1070 mm | |
|---|---|---|
| 2-seat loveseat overall dimensions | 1960 x 965 x 1070 mm | |
| Seat height from floor | 450 mm | |
| Seat depth per position | 584 mm | |
| Backrest height above seat | 620 mm | |
| Armrest width per side | 220 mm | |
| Armrest height above seat | 180 mm | |
| Seat cushion thickness | 150 mm | |
| Back cushion thickness | 120 mm | |
| Leg clearance under sofa | 50 mm | |
| Individual seat width (3-seat unit) | 630 mm | |
| Individual seat width (2-seat unit) | 760 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total set weight | 185 kg | |
|---|---|---|
| Static load per seat | 160 kg | |
| Maximum total set load | 800 kg | |
| Cushion foam density (seating) | 45D high-resilience polyurethane foam | |
| Cushion foam rebound rate | 60% | |
| Recline mechanism cycle rating | 25000 cycles | |
| Seam stitch pitch | 8 stitches per inch | |
| Leather upholstery abrasion resistance | 50000 Martindale cycles | |
| Recommended warranty period | 5 years for frame/mechanisms, 1 year for upholstery | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and armrest upholstery | Top-grain cowhide leather with natural grain finish | |
|---|---|---|
| Side and back panel upholstery | Matching performance polyurethane vinyl | |
| Internal frame | Kiln-dried solid pine and 18mm plywood with metal reinforced joinery | |
| Seat cushion core | 45D high-density polyurethane foam wrapped in 200g polyester fiber | |
| Back cushion filling | 32D high-resilience foam blended with silk floss for soft support | |
| Seat support system | 3.8mm gauge sinuous steel springs spaced 100mm apart | |
| Recline mechanism hardware | 2mm thick cold-rolled steel frame with powder-coated finish | |
| Base construction | Solid block upholstered base with no exposed feet, floor-protecting non-woven pad | |
| Stitching thread | High-tensile bonded polyester thread matched to upholstery color | |
| Decorative throw pillows | Removable covers with polyfiber fill, zipper closure for cleaning | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
| Recline adjustment per seat | Independent backrest recline to 160 degrees with integrated extending footrest | |
|---|---|---|
| Recline control access | Side-mounted lever (manual) or button panel (power) located on outer armrest | |
| Footrest operation | Synchronized extension with backrest recline, locks in fully extended position | |
| Cushion design | Tight seat cushions with plush fiber-wrapped foam core, non-slip base to prevent shifting | |
| Pillow accessories | Two included removable accent pillows with washable zippered covers | |
| Configuration flexibility | 3-seat and 2-seat units can be placed facing each other or side-by-side as linear set | |
| Cleaning accessibility | Smooth leather surface allows wipe cleaning, no removable seat covers for core cushions | |
| Floor protection | Hidden non-marring felt pads on base bottom prevent hard floor scratching | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Residential living rooms | Formal lounge layout for family and guest seating in open-plan or dedicated living spaces | |
|---|---|---|
| Executive office reception areas | Premium seating for visitor waiting zones in high-end corporate offices | |
| High-end residential show homes | Display seating for model home living spaces demonstrating modern luxury interior design | |
| VIP lounge areas | Comfortable reclining seating for private club, hotel or premium lounge waiting areas | |
| Recommended pairing | Coordinate with low-profile stone-top coffee tables and upholstered drum ottomans as shown in display | |
| Seating capacity | Accommodates 5 adults comfortably across both units, with recline function for two end positions |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Applicable European standard for domestic furniture seating strength, durability and stability | |
|---|---|---|
| EN 1021-1:2014 | Applicable standard for upholstered furniture cigarette ignition resistance |
Standards applicable to China-market projects
| GB/T 1952.1-2012 | Applicable standard for upholstered sofas, covering strength, durability and safety requirements | |
|---|---|---|
| GB 20400-2006 | Applicable standard for leather upholstery material limits of harmful substances | |
| GB 17927.1-2011 | Applicable standard for upholstered furniture fire resistance for residential use |
This product must meet the following technical requirements: 1. GB/T 1952.1-2012: Applicable standard for upholstered sofas, covering strength, durability and safety requirements; 2. GB 20400-2006: Applicable standard for leather upholstery material limits of harmful substances; 3. GB 17927.1-2011: Applicable standard for upholstered furniture fire resistance for residential use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
