Product supplierRust Chenille Button-Tufted Armless Modular Lounge Chair, Plush terracotta chenille fabric, 350 gsm weight
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 900 × 950 × 900 mm | |
|---|---|---|
| Seat height | 450 mm | |
| Seat width | 800 mm | |
| Seat depth | 700 mm | |
| Backrest height | 450 mm | |
| Backrest width at widest point | 850 mm | |
| Seat cushion thickness | 250 mm | |
| Backrest cushion thickness | 220 mm | |
| Base ground clearance | 20 mm | |
| Tie connector length | 150 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 30 kg | |
|---|---|---|
| Recommended static load capacity | 181 kg | |
| Seat foam density | 45 kg/m³ | |
| Foam rebound rate | 60% | |
| Fabric abrasion resistance | 30000 Martindale cycles | |
| Cushion compression set resistance | 5% | |
| Seam stitch pitch | 8 stitches per inch | |
| Modular connection tensile strength | 50 kg per tie | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Plush terracotta chenille fabric, 350 gsm weight | |
|---|---|---|
| Seat fill core | High-density polyurethane foam wrapped with 50mm soft down-alternative fiber | |
| Backrest fill core | High-density polyurethane foam with tufted button anchoring | |
| Internal frame | 15mm thick plywood hidden frame encased in cushioning | |
| Tufting fasteners | Reinforced fabric-covered buttons with internal nylon ties | |
| Modular connectors | Matching woven fabric ties at front base edge | |
| Base underside | Non-slip polyester mesh fabric layer | |
| Upholstery fabric breathability rating | Class 2 air permeability | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Modular connection capability | Front fabric ties secure to adjacent matching modular units to build custom sectionals | |
|---|---|---|
| Relaxed fixed recline angle | 110 degree fixed backrest angle optimized for casual lounging | |
| Cushion retention | Integrated non-slip cushion attachment prevents shifting during use | |
| Surface compatibility | Low-friction soft base is safe for hardwood, tile and carpeted floors | |
| Upholstery maintenance | Spot-cleanable fabric surface with removable cushion cover access via hidden zippers | |
| Modular layout flexibility | Connectable to corner, armless and ottoman units from the same product series to form L-shape, U-shape or linear seating | |
| No assembly required out of packaging | Fully upholstered unit ships as a single assembled piece | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential living room casual seating | Suitable for placement in open living areas as standalone accent seating or part of a sectional | |
|---|---|---|
| Apartment studio compact lounge space | Small footprint armless design fits limited floor space in urban residential units | |
| Home media room supplementary seating | Deep plush seat and relaxed angle support extended viewing comfort | |
| Modular custom lounge configurations | Connect multiple units to build U-shaped, L-shaped or linear lounge setups for open loft spaces | |
| Target user demographic | Designed for adults seeking casual, low-slung lounging without formal upright seating posture | |
| Recommended adjacent pairing | Works with matching fabric ottomans and corner units for coordinated lounge setups | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture strength, durability and safety requirements for domestic seating products | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture ignitability test for smouldering cigarette flame resistance |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements applicable to wooden-framed upholstered furniture for strength and stability | |
|---|---|---|
| GB 20400-2006 | Leather and fabric furniture limits of harmful substances applicable for upholstery chemical safety | |
| GB/T 1952.1-2012 | Upholstered sofas test methods applicable for seat durability and load performance |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements applicable to wooden-framed upholstered furniture for strength and stability; 2. GB 20400-2006: Leather and fabric furniture limits of harmful substances applicable for upholstery chemical safety; 3. GB/T 1952.1-2012: Upholstered sofas test methods applicable for seat durability and load performance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool