| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 3600 x 1820 x 750 mm | |
|---|---|---|
| Seat height (top of cushion to floor) | 500 mm | |
| Seat depth (front edge of seat to front of back cushion) | 910 mm | |
| Arm width (outer edge to seat cushion) | 250 mm | |
| Arm height (top of arm to floor) | 660 mm | |
| Seat cushion thickness | 250 mm | |
| Back cushion thickness | 200 mm | |
| Base plinth height (bottom of sofa frame to floor) | 50 mm | |
| Corner module width (outer arm to inner corner seam) | 1000 mm | |
| Chaise segment depth (back cushion front to outer end) | 1820 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total static load capacity | 545 kg | |
|---|---|---|
| Seat foam density | 35 kg/m³ | |
| Foam rebound rate | 60% | |
| Upholstery abrasion resistance | 30000 Martindale cycles | |
| Upholstery lightfastness rating | 5 (8scale) | |
| Seam stitching pitch | 30 mm per 10 stitches | |
| Total net weight | 150 kg | |
| Seat support spring fatigue life | 25000 cycles | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Internal load-bearing frame | Kiln-dried solid hardwood / engineered wood, moisture content 12% | |
|---|---|---|
| Seat support system | 3.8mm diameter sinuous zigzag springs spaced 100mm apart, with polypropylene webbing reinforcement | |
| Seat cushion core | Multi-density high-resilience polyurethane foam with 20mm soft fiber wrap | |
| Back cushion fill | Blown polyester fiber / down-alternative fill with removable inner liners | |
| Upholstery surface | 1.2mm thick top-grain look taupe leather / high-wear faux leather, matte finish | |
| Arm structure | Padded hardwood frame wrapped with 50mm foam layer, finished with matching upholstery | |
| Base plinth | Hardwood frame wrapped in matching upholstery, flush floor-level design with hidden small floor glides | |
| Modular connection hardware | Powder-coated steel interlocking clips between seating modules, corrosion-resistant finish | |
| Stitching details | Matching taupe bonded nylon thread, reinforced stress points at arm/seat seams | |
| Back cushion liner | Breathable non-woven polypropylene fabric liner with zipper access for fill adjustment and removal | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
| Modular reconfiguration | Interlocking steel clip connections allow left/right chaise orientation adjustment and additional module expansion | |
|---|---|---|
| Cushion removability | All seat and back cushions are loose and removable for cleaning, upholstery maintenance, and re-fluffing | |
| Lounge seating support | Extra-deep seat design supports semi-reclined relaxed seating posture with legs up, suitable for long-duration casual use | |
| Corner integrated side table compatibility | Pre-sized gap at inner corner accommodates matching narrow side table for beverages, decor, or remote storage | |
| Floor protection | Hidden non-marking plastic glides under base plinth prevent scuffing on hard flooring and carpet, no rolling casters installed | |
| Cleaning compatibility | Smooth non-porous upholstery surface supports gentle wiping with leather-safe cleaning products for routine stain removal | |
| Assembly requirement | Knock-down assembly of modular segments and attachment of base/arm components required, no permanent fixed joinery needed for home installation | |
| Back cushion adjustment | Loose back cushions support 2 positional placement angles (15 degree upright support, 30 degree reclined lounge) for customized posture support | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 3 cartons | |
|---|---|---|
| Largest carton dimensions | 2000 x 1000 x 800 mm | |
| Smallest carton dimensions | 1200 x 700 x 300 mm | |
| Total gross shipping weight | 165 kg | |
| Total shipping volume (CBM) | 2.28 CBM | |
| Packaging protection layers | EPE foam wrap, bubble wrap, hard corner protectors, non-woven fabric cover, 5-layer corrugated cardboard cartons | |
| 40ft HQ container loading quantity | 32 units | |
| Included assembly items | Hex key assembly tool, interlocking hardware, installation manual, matching cushion sets | |
| on-site assembly time | 50 minutes | |
| Reference Package Count | 1 set / 2 cartons |
Recommended spaces / users / usage modes
| Residential living room primary seating | Suitable as central lounge seating for 5adults in open-plan living spaces, positioned facing a coffee table or media console as shown in the reference scene | |
|---|---|---|
| Modern minimalist / contemporary interior schemes | Complements neutral tone, stone, wood panel, and soft furnishing palettes with its low-profile silhouette and matte taupe finish | |
| High-end apartment / penthouse lounge areas | Appropriate for spaces requiring unobtrusive, spacious seating without tall backs that block sight lines across open rooms | |
| Hospitality lounge / waiting area use (contract grade) | Suitable for upscale hotel lobbies, VIP lounge areas, or executive reception spaces when specified with contract-grade abrasion and durability upgrades | |
| Open-plan home office lounge zones | Provides casual meeting or break seating adjacent to work areas, supporting relaxed posture during informal discussions | |
| Recommended complementary pairing | Pairs with low square marble/stone coffee tables, arc floor lamps, and soft low-pile area rugs to match the curated aesthetic shown in the reference scene | |
| Home cinema secondary seating | Suitable for front-row casual home cinema seating adjacent to media walls, supporting extended reclined viewing posture for movie and media consumption |
EU Market Access Requirements* EN Standards
| EN 12520:2015 applicability | Furniture - strength, durability and safety requirements for domestic seating, applies to structural load and stability testing of the sofa | |
|---|---|---|
| EN 1021-1:2014 applicability | Upholstered furniture - assessment of ignitability of upholstered furniture - part 1: ignition source smouldering cigarette, applies to fire safety of upholstery and fill materials |
Standards applicable to China-market projects
| GB/T 3324-2017 applicability | General technical requirements for wooden furniture, applies to structural strength, dimensional stability, and safety of the internal wood frame | |
|---|---|---|
| GB/T 1952.1-2022 applicability | Strength and durability test standard for upholstered sofas, applies to seat, back, and arm static and fatigue load testing | |
| GB 18584-2001 applicability | Indoor decorating and refurbishing materials - limit of harmful substances in wooden furniture, applies to formaldehyde and VOC emission limits for frame materials | |
| GB 20400-2006 applicability | Leather furniture specification, applies to material labeling, physical performance, and harmful substance limits for genuine leather upholstery variants |
This product must meet the following technical requirements: 1. GB/T 3324-2017 applicability: General technical requirements for wooden furniture, applies to structural strength, dimensional stability, and safety of the internal wood frame; 2. GB/T 1952.1-2022 applicability: Strength and durability test standard for upholstered sofas, applies to seat, back, and arm static and fatigue load testing; 3. GB 18584-2001 applicability: Indoor decorating and refurbishing materials - limit of harmful substances in wooden furniture, applies to formaldehyde and VOC emission limits for frame materials; 4. GB 20400-2006 applicability: Leather furniture specification, applies to material labeling, physical performance, and harmful substance limits for genuine leather upholstery variants; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
