| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 2400 x 950 x 830 mm | |
|---|---|---|
| seat height from floor | 450 mm | |
| seat depth per position | 600 mm | |
| backrest total height from seat | 460 mm | |
| armrest height from seat | 200 mm | |
| armrest width | 180 mm | |
| support leg height | 120 mm | |
| individual seat cushion size | 680 x 600 x 150 mm | |
| throw pillow size | 450 x 450 mm | |
| brown left arm accent panel size | 550 x 420 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| product net weight | 80 kg | |
|---|---|---|
| static load capacity per seat | 150 kg | |
| upholstery abrasion resistance | 30000 cycles | |
| upholstery lightfastness grade | 5 | |
| cushion foam density | 45 kg/m³ | |
| cushion foam rebound rate | 60% | |
| frame structural warranty | 10 years | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
Core acceptance fields · Panels / hardware / frame / upholstery
| internal load-bearing frame | Kiln-dried solid pine wood frame, 30mm section thickness | |
|---|---|---|
| seat support system | 80mm wide elastic webbing, 50mm spaced, plus sinuous spring base | |
| main upholstery surface | 1.2mm thick top-grain leather / high-grade faux leather, cream finish | |
| accent panel upholstery | 1.4mm thick saddle-brown leather, stitched to left outer arm | |
| seat cushion filling | 45kg/m³ high-resilience polyurethane foam core, wrapped with 20mm down blend layer | |
| back cushion filling | 35kg/m³ soft polyurethane foam blended with polyester fiber fill | |
| contrast piping trim | 2mm diameter matching cream leather piping along all cushion seams | |
| support legs and base frame | 20mm diameter black powder-coated cylindrical metal legs, connected by black metal perimeter base | |
| throw pillow covers | Color-blocked orange, cream and brown faux leather, filled with 100% polyester fiber | |
| seam construction | 8 stitches per 30mm (8 per inch) reinforced stitching on all upholstery seams | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
Adjustment / rotation / tilt / mobility / storage features
| seating configuration | Fixed three-position straight seating, no recline or fold-out functions | |
|---|---|---|
| cushion design | Detachable individual box-style seat and back cushions for easy cleaning | |
| armrest design | Fixed fully padded square armrests on both sides, with decorative brown accent panel on left arm | |
| leg assembly | Detachable metal legs that screw into the base frame for reduced shipping volume | |
| floor protection | Non-marking plastic foot glides on each leg base to prevent hard floor scratches | |
| accessory inclusion | Two color-blocked decorative throw pillows included as standard matching accents | |
| cushion reversibility | Seat cushions are reversible to extend upholstery wear life over use | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| residential living room main seating | Suitable for 3-adult seating in modern, light luxury or minimalist style living rooms | |
|---|---|---|
| apartment open plan lounge area | Scaled appropriately for medium to large open-plan apartment living spaces | |
| office reception lounge seating | Appropriate for corporate reception areas or executive lounge waiting spaces | |
| recommended pairing furniture | Pairs with matching two-seater sofa, single lounge chair and marble/wood coffee table of similar contemporary style | |
| clearance requirement | Requires minimum 100mm rear clearance from walls to prevent upholstery scuffing | |
| target user group | Suitable for households of 4people, or commercial spaces with medium visitor traffic |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Applicable standard for domestic furniture seating: strength, durability and safety requirements for EU market | |
|---|---|---|
| EN 1021-1:2014 | Applicable standard for upholstered furniture ignitability resistance to smouldering cigarette source |
Standards applicable to China-market projects
| GB/T 1952.1-2012 | Applicable standard for upholstered sofas: defines structural safety, durability and performance test methods for Chinese market | |
|---|---|---|
| GB 18401-2010 | Applicable standard for national general safety technical code for textile products, formaldehyde and harmful substance limits |
This product must meet the following technical requirements: 1. GB/T 1952.1-2012: Applicable standard for upholstered sofas: defines structural safety, durability and performance test methods for Chinese market; 2. GB 18401-2010: Applicable standard for national general safety technical code for textile products, formaldehyde and harmful substance limits; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
