| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall assembled dimensions | 2600 x 1000 x 910 mm | |
|---|---|---|
| seat height from floor | 480 mm | |
| seat depth per position | 610 mm | |
| seat width per individual position | 730 mm | |
| armrest height from seat surface | 250 mm | |
| armrest width | 240 mm | |
| backrest height from seat surface | 430 mm | |
| base clearance height | 50 mm | |
| cushion thickness (seat) | 200 mm | |
| cushion thickness (back) | 150 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| total product weight | 87 kg | |
|---|---|---|
| static load capacity per seat | 150 kg | |
| seat foam density | 40 kg/m³ | |
| foam rebound rate | 60% | |
| seating capacity | 3 adults | |
| upholstery abrasion resistance | 50000 cycles | |
| seam stitch pitch | 30 mm | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
Core acceptance fields · Panels / hardware / frame / upholstery
| contact surface upholstery | Top-grain cowhide leather, 1.4mm thick | |
|---|---|---|
| non-contact upholstery (sides/back/base) | Match-grade synthetic leather | |
| internal frame | Kiln-dried hardwood, 30mm thick sections, corner-blocked | |
| seat suspension | 8-gauge sinuous steel springs, 120mm spacing | |
| cushion fill | High-resilience polyurethane foam wrapped with 20mm polyester fiber | |
| armrest accent trim | Solid walnut veneer, 20mm thick | |
| arm panel quilting | Diamond-pattern stitched upholstery over 10mm foam padding | |
| base panel covering | Horizontal stitched matching upholstery over wood frame | |
| floor glides | Hard plastic non-marking glides, 10mm height | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg |
Adjustment / rotation / tilt / mobility / storage features
| seating configuration | Three fixed individual seat positions with segmented backrests | |
|---|---|---|
| recline function | Fixed non-reclining backrest angled 10 degrees from vertical | |
| cushion design | Tight fixed seat and back cushions, non-removable covers | |
| arm support | Wide padded rolled armrests with quilted side panels for side support | |
| floor protection | Integrated non-marking glides prevent floor scuffing during repositioning | |
| back support | Segmented two-tier back cushions with built-in lumbar contour | |
| modular extension | Fixed straight three-seat unit, no built-in sectional connection hardware | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| residential living room | Primary seating for family rooms or formal living spaces, seats 3 adults | |
|---|---|---|
| office reception lounge | Guest seating for executive reception areas with contemporary aesthetic | |
| luxury apartment common areas | Seating for shared resident lounges with premium leather finish | |
| hotel guest suite seating | In-suite seating for high-end hotel rooms and boutique accommodation | |
| configuration recommendation | Pair with matching leather armchairs and coffee table for coordinated seating sets | |
| maintenance requirement | Wipe leather surfaces with neutral leather cleaner regularly to preserve finish |
EU Market Access Requirements* EN Standards
| EN 1022:2018 | Stability test standard for domestic and contract seating | |
|---|---|---|
| EN 12520:2015 | Strength, durability and safety requirements for domestic seating | |
| EN 13356:2009 | Upholstery leather performance requirements for furniture |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal wood frame | |
|---|---|---|
| GB 20400-2006 | Leather upholstery material safety limits for harmful substances | |
| GB/T 1952.1-2012 | Mechanical performance test methods for upholstered sofas |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal wood frame; 2. GB 20400-2006: Leather upholstery material safety limits for harmful substances; 3. GB/T 1952.1-2012: Mechanical performance test methods for upholstered sofas; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
