Product supplierLeft-Chaise Armless Low-Profile L-Shaped Sectional Sofa, Caramel Finish, Kiln-dried solid pine wood, 30mm section thickness
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 3500 × 1800 × 840 mm | |
|---|---|---|
| seat height from floor | 420 mm | |
| main seat depth (non-chaise) | 1000 mm | |
| chaise lounge length | 1800 mm | |
| chaise seat depth | 1200 mm | |
| back cushion height | 420 mm | |
| throw pillow dimensions | 450 x 450 mm | |
| seating width per position | 1000 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| total seating capacity | 4 persons | |
|---|---|---|
| overall static load capacity | 1200 kg | |
| seat cushion foam density | 45 kg/m³ | |
| back cushion foam density | 30 kg/m³ | |
| fabric abrasion resistance (Martindale) | 50000 cycles | |
| cushion rebound rate | 60% | |
| product net weight | 150 kg | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| internal frame | Kiln-dried solid pine wood, 30mm section thickness | |
|---|---|---|
| seat cushion core | 45kg/m³ high-resilience polyurethane foam, 250mm thick | |
| seat cushion wrap | 20mm thick down-polyester blended fiber topper | |
| back cushion fill | 30kg/m³ foam core wrapped with 30mm polyester fiber | |
| upholstery cover | 1.2mm thick caramel full-grain effect faux/genuine leather | |
| base plinth | Padded hardwood frame wrapped in matching upholstery | |
| seam construction | Reinforced stitched seams with 8mm stitch pitch | |
| throw pillow fill | 100% hollow conjugated polyester fiber | |
| seat support system | 80mm wide elastic webbing, 50mm spacing under seat cushions | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| seating configuration | Fixed left-facing chaise L-shape, three standard seats plus lounger | |
|---|---|---|
| cushion design | Removable zippered seat and back cushion covers for cleaning | |
| base design | Floor-standing plinth base with no exposed legs, low-profile silhouette | |
| accessory inclusion | Four matching square throw pillows included as standard | |
| modular connection | Pre-installed steel clip connectors between seat modules for stable alignment | |
| seat use mode | Supports upright seated and fully reclined lounging postures | |
| floor protection | Non-slip felt pads installed under base to prevent hard floor scratching | |
| base block height | 320 mm | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| residential living room | Suitable for open-plan modern, wabi-sabi or minimalist living spaces | |
|---|---|---|
| apartment lounge use | Fits medium to large studio or apartment open living areas | |
| casual lounging use | Ideal for relaxed movie watching, reading or casual gathering | |
| designer show home use | Suitable for model home staging and high-end residential display | |
| low-traffic reception use | Appropriate for boutique office lounge or informal waiting areas | |
| residential open-plan living room | Suitable for modern, wabi-sabi or minimalist living spaces, low profile matches contemporary interiors | |
| large apartment lounge | Fits medium to large studio or apartment open living areas, armless design maximizes usable seating width | |
| casual home entertainment use | Ideal for movie watching, reading or small group gatherings, deep seats support multiple relaxed postures |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture strength, durability and safety for domestic seating, applicable for use | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture ignition resistance (smoulder test), applicable to upholstery |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal wood frame | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, applicable to formaldehyde emission | |
| GB/T 1952.1-2012 | Test methods for sofas, applicable to durability and load performance testing |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal wood frame; 2. GB 18584-2001: Limit of harmful substances in wooden furniture, applicable to formaldehyde emission; 3. GB/T 1952.1-2012: Test methods for sofas, applicable to durability and load performance testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool