| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions | 2460 x 1002 x 793 mm | |
|---|---|---|
| seat height from floor | 460 mm | |
| seat depth (usable) | 660 mm | |
| seat cushion thickness | 140 mm | |
| backrest height above seat | 333 mm | |
| rolled arm width | 229 mm | |
| front apron height | 180 mm | |
| bun foot height | 120 mm | |
| individual seat cushion width | 1000 mm | |
| arm height from floor | 793 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| total static load capacity | 340 kg | |
|---|---|---|
| net weight (product) | 120 kg | |
| seat foam density | 45 kg/m³ | |
| foam rebound rate | 45% | |
| upholstery abrasion resistance | 50000 cycles | |
| frame durability rating | 10 years use | |
| maximum seating occupancy | 3 adults | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
Core acceptance fields · Panels / hardware / frame / upholstery
| internal frame | Solid hardwood + plywood construction | |
|---|---|---|
| upholstery | Light off-white smooth leather or faux leather | |
| seat cushion fill | High-density foam wrapped with dacron, pocket spring core | |
| backrest fill | High-density polyurethane foam with button tufting anchors | |
| support feet | Dark stained solid turned wood (bun style) | |
| decorative trim | Antique brass-toned metal nailhead studs | |
| seat deck support | Serpentine steel springs with webbing layer | |
| tufting buttons | Upholstery-covered matching fabric/leather buttons | |
| stitch construction | Reinforced bonded nylon stitching, 8 stitches per inch | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg |
Adjustment / rotation / tilt / mobility / storage features
| seating configuration | 3-position static fixed seating with two divided plush seat cushions | |
|---|---|---|
| back support | Diamond button-tufted upright backrest with consistent lumbar support | |
| arm support | Padded rolled scroll arms equal in height to backrest, trimmed with nailheads | |
| assembly requirement | Knock-down leg/arm attachment with included hardware for residential setup | |
| cushion design | Removable reversible seat cushions for even wear and cleaning | |
| surface maintenance | Wipe-clean smooth leather/PU surface resistant to light spills | |
| floor protection | Non-marking felt pads on foot bases to prevent hard floor scratching | |
| structural stability | Six support points (two legs per side, two center feet) for even weight distribution | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| residential living room | Formal classic seating for primary living spaces, matched with traditional decor | |
|---|---|---|
| executive office reception | Premium guest seating for office reception areas or executive lounges | |
| hotel lounge seating | Permanent seating for boutique hotel lobbies and guest suite sitting areas | |
| studio/study space | Formal seating for private studies, libraries or reading rooms | |
| event/function space | Formal seating for wedding venues, club lounges or high-end event spaces | |
| recommended pairing | Matches dark wood occasional tables, tufted ottomans and traditional area rugs |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture - strength, durability and safety for domestic seating | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture ignitability (smouldering cigarette) for residential use |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for frame and structural strength | |
|---|---|---|
| GB 20400-2006 | Leather and fur limits of harmful substances, applicable if genuine leather upholstery is specified | |
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for frame and structural strength; 2. GB 20400-2006: Leather and fur limits of harmful substances, applicable if genuine leather upholstery is specified; 3. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
