Product supplierModern Blocky Black Leather Three-Seater Sofa with Grey Arm Accent, Full-grain black cowhide leather, 1.4mm thickness
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2200 × 1000 × 880 mm | |
|---|---|---|
| seat height | 420 mm | |
| seat depth per position | 580 mm | |
| seat width per position | 620 mm | |
| armrest height | 620 mm | |
| armrest width | 200 mm | |
| backrest height above seat | 460 mm | |
| base height | 120 mm | |
| cushion thickness | 180 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| total static load capacity | 300 kg | |
|---|---|---|
| net product weight | 75 kg | |
| fabric abrasion resistance | 50000 cycles | |
| foam density | 45 kg/m³ | |
| foam rebound rate | 60% | |
| frame joint static load durability | 10000 cycles | |
| warranty period | 1 year | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| outer upholstery | Full-grain black cowhide leather, 1.4mm thickness | |
|---|---|---|
| inner frame | Kiln-dried solid pine wood, 30mm section thickness | |
| seat cushion fill | High-density polyurethane foam wrapped in 20mm down layer | |
| back cushion fill | 35kg/m³ polyurethane foam with polyester fiber wrap | |
| support system | 80mm wide sinuous steel springs with 50mm elastic webbing | |
| armrest accent panel | Matte grey faux leather or painted composite trim | |
| base upholstery | Matching black leather wrap over rigid wood frame | |
| seam construction | Reinforced polyester thread with 8 stitches per inch | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg | |
| Reference Upholstery Color Count | Recommended 8fabric/leather color options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| seating configuration | Three fixed individual seating positions with segmented cushions | |
|---|---|---|
| recline function | Fixed upright backrest with no powered or manual recline mechanism | |
| arm support | Wide padded armrests on both ends with soft wrapped surfaces | |
| base design | Floor-resting block base with floor protection glides, no exposed legs | |
| cushion design | Tufted segmented seat cushions with fixed attachment to frame | |
| backrest support | Ergonomic curved segmented backrests for lumbar alignment | |
| modularity | Single straight fixed unit, no sectional connector points | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| residential living room | Primary placement for family casual seating paired with coffee table | |
|---|---|---|
| modern apartment open plan space | Low-profile block form fits contemporary minimalist interior design | |
| lounge reception area | Formal but comfortable seating for small office or club guest waiting | |
| recommended configuration | Pair with 1100 mm diameter coffee table and area rug for balanced layout | |
| user capacity | Comfortably seats 3 average adults for daily relaxed seating | |
| maintenance suitability | Smooth leather surface allows easy wipe-clean for regular household use |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| furniture mechanical safety | EN 12520:2015 | |
|---|---|---|
| upholstered furniture flammability | EN 1021:2014 |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| upholstered furniture safety | GB 17927.1 | |
|---|---|---|
| furniture dimension marking | GB/T 3327 | |
| furniture formaldehyde emission | GB 18584 |
Standardized tender description text
This product must meet the following technical requirements: 1. upholstered furniture safety: GB 17927.1; 2. furniture dimension marking: GB/T 3327; 3. furniture formaldehyde emission: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool