Product supplierTaupe Woven Fabric Three-Seat Sofa with Black Metal Legs, Matte taupe woven polyester-linen blend, 300 gsm weight
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2340 × 980 × 850 mm | |
|---|---|---|
| Seat height from floor | 430 mm | |
| Seat depth | 650 mm | |
| Total seat width | 1800 mm | |
| Armrest height from floor | 650 mm | |
| Armrest width | 180 mm | |
| Under-sofa clearance | 140 mm | |
| Backrest height above seat | 420 mm | |
| Cushion thickness (seat) | 180 mm | |
| Cushion thickness (back) | 150 mm | |
| Leg footprint width | 2200 mm | |
| Throw pillow included count | 5 units | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 57 kg | |
|---|---|---|
| Total static load capacity | 330 kg | |
| Per-seat rated user weight | 110 kg | |
| Seat foam density | 25 kg/m³ | |
| Foam rebound rate | 45% | |
| Upholstery abrasion resistance | 30000 Martindale cycles | |
| Seat spring system endurance | 25000 cycles | |
| Frame joint static load test | 600 kg | |
| Leg static load per leg | 120 kg | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Upholstery fabric | Matte taupe woven polyester-linen blend, 300 gsm weight | |
|---|---|---|
| Seat cushion core | 25 kg/m³ polyurethane foam wrapped with polyester fiber | |
| Back cushion core | 18 kg/m³ polyurethane foam mixed with down-like polyester fill | |
| Inner frame | Kiln-dried pine and plywood composite, 18 mm panel thickness | |
| Support system | 8 cm wide sinuous steel springs + 50 mm elastic webbing | |
| Leg construction | 1.5 mm thick black powder-coated steel, angled minimalist design | |
| Seam construction | 8 stitches per 30 mm seam pitch, reinforced stress point stitching | |
| Leg foot pads | Non-slip 5 mm thick rubber floor protection pads | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg | |
| Reference Upholstery Color Count | Recommended 8fabric/leather color options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating configuration | Fixed straight three-seat layout with three separate seat cushions | |
|---|---|---|
| Back cushion setup | Fixed back bolsters plus 5 loose matching throw pillows | |
| Assembly requirement | Knock-down leg attachment with included hardware, no full frame assembly | |
| Floor protection | Non-slip rubber foot pads on all four legs to prevent floor scratches | |
| Cover design | Fixed non-removable upholstery covers, spot clean only | |
| Weight distribution | Four-point metal leg support prevents sagging on even hard flooring | |
| Seat ergonomics | 650 mm deep seat supports slouched lounging as well as upright seated posture | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential living room | Primary use as main lounge seating for 3 adults in modern homes | |
|---|---|---|
| Apartment and loft spaces | Low-profile open base design fits small to medium urban living spaces | |
| Hotel and boutique lounge areas | Neutral taupe color and minimalist form suit hospitality common areas | |
| Office reception and waiting areas | Comfortable three-seat configuration for casual visitor seating | |
| Studio and show home staging | Clean neutral aesthetic works as display seating for property staging | |
| Recommended pairing | Pair with low-profile coffee tables of 450 mm height |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Domestic furniture seating strength, durability and stability requirements | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture flammability resistance to cigarette ignition |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to wood composite frame | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances for wood furniture, applicable to frame panels | |
| GB/T 1952.1-2012 | Test methods for sofas, applicable to seating strength and durability | |
| GB 20400-2006 | Limit of harmful substances for leather and fabric upholstery, applicable to fabric |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to wood composite frame; 2. GB 18584-2001: Limit of harmful substances for wood furniture, applicable to frame panels; 3. GB/T 1952.1-2012: Test methods for sofas, applicable to seating strength and durability; 4. GB 20400-2006: Limit of harmful substances for leather and fabric upholstery, applicable to fabric; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool