Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	900 × 850 × 900 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Total set net weight	58 kg
Recommended load per chair	160 kg
Recommended tabletop load	30 kg
Seating capacity	2 persons
Cushion foam density	35 kg/m3
Cushion foam indentation performance	65 N
Cushion cover seam pitch	8 stitches per 25 mm
Structural durability target	100000 seating cycles
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Chair structural frame	Dark-finish hardwood or engineered wood frame with 45 mm rails and exposed joinery
Back top rail	Stepped layered wood rail with rounded outer edge and dark brown finish
Seat supporting panel	20 mm board or webbed support platform beneath the loose cushion
Cushion core	High-resilience polyurethane foam with 120 mm seat thickness and 100 mm back thickness
Cushion upholstery	Off-white woven fabric or leather-look upholstery with dark edge piping
Outer side panels	Light upholstered inset panels enclosed by dark wood rails and posts
Side decorative detail	Round dark grille-style inset with two horizontal line details on each outer side panel
Side table frame	Four dark wood posts joined by square aprons and a matching lower shelf
Tabletop surface	35 mm dark wood veneer or engineered wood panel with inset border detailing
Fasteners and corner blocks	Steel screws, dowels, and 18 mm wooden corner blocks at rail joints
Foot protection	Nylon or felt floor glides on four chair legs and four table legs
Surface finish	Dark brown sealed wood finish with low-sheen appearance

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Single-person seating support	Each chair provides a 620 mm wide enclosed seat with fixed wood arms and upright back support
Removable cushion design	Seat and back cushions sit within the frame and can be lifted for cleaning or reupholstery
Fixed lounge recline angle	100 degrees
Arm support	620 mm high continuous rectangular arms support forearms and define each seating bay
Shared side table access	The 500 mm square table is centrally placed for use from either chair
Open lower shelf storage	260 mm high shelf compartment provides storage for books or refreshment trays
Decorative side ventilation-style detail	Round grille-style insert on each outer chair side adds a visual focal point without an adjustment function
Floor protection and leveling	Four glides per chair and four per table allow minor leveling while reducing floor abrasion
Cleaning access	Open 160 mm floor clearance permits sweeping and robotic vacuum access under the chair rails
Set arrangement flexibility	Chairs may face parallel, angled, or separated configurations while retaining the table between them
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Office reception area	Place the two chairs and central table in executive reception zones for short guest conversations and refreshment service
Hotel lobby lounge	Use in quiet hotel corners or VIP waiting areas where low-contrast upholstery and wood detailing are required
Tea room or study	Position beside a window or tea wall for two-person reading, tea service, or casual discussion
Senior living reception	Specify for assisted common areas needing 450 mm seat height and supportive fixed arms
Residential living room	Pair the chairs as a conversation group in a study, living room, or covered balcony
Club or showroom waiting zone	Repeat the set in multiples along circulation routes for orderly 2-person seating bays
Recommended matching furniture	Combine with a 1200 mm coffee table or 2-seat sofa from the same wood and upholstery finish
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

Seating strength and durability	EN 16139 durability and safety requirements for non-domestic seating
Upholstered furniture safety	EN 1021cigarette and EN 1021 match ignition resistance tests
Formaldehyde panel emission	EN 13986 wood-based panel formaldehyde E1 classification
Surface furniture test	EN 15185 furniture surface resistance to dry heat and EN 12720 resistance to cold liquids

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.4

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

Formaldehyde emission acceptance	GB/T 39600 artificial panel emission limit, E1 requirement
Wood furniture quality acceptance	GB/T 3324 general technical requirements for wooden furniture
Upholstered furniture safety	GB 17927 upholstered furniture safety requirements
Furniture mechanical test for seating	GB/T 10357 seating strength and stability test methods

Standardized tender description text

This product must meet the following technical requirements:
1. Formaldehyde emission acceptance: GB/T 39600 artificial panel emission limit, E1 requirement;
2. Wood furniture quality acceptance: GB/T 3324 general technical requirements for wooden furniture;
3. Upholstered furniture safety: GB 17927 upholstered furniture safety requirements;
4. Furniture mechanical test for seating: GB/T 10357 seating strength and stability test methods;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · LC-1S2-T500-NEUTRAL

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · LC-1S2-T500-NEUTRAL

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · LC-1S2-T500-NEUTRALOpen Export Tool

Quick Actions

Post an RFQ

Product Description

The Two-Seat Lounge Seating Set with Dark Wood Frame and Square Side Table presents a structured two-person seating arrangement with two single lounge chairs and a centrally positioned square table. Its visual character combines a dark brown wood framework with light off-white woven fabric or leather-look upholstery, dark edge piping, padded cushions, and exposed joinery. Each chair is enclosed by fixed rectangular wood arms and an upright back, while the stepped, rounded top rail and round grille-style outer side inserts provide refined decorative detail. The matching table uses four dark wood posts, square aprons, an inset-bordered top, and an open lower shelf that reinforce the set's orderly, low-contrast appearance. Construction centers on a dark-finish hardwood or engineered wood frame built with 45 mm rails. Beneath the loose seat cushion is a 20 mm board or webbed support platform. Cushion cores use high-resilience polyurethane foam, with a finished seat cushion thickness of 90 mm and backrest padding thickness of 70 mm. The back includes a defined lumbar support zone, and covers are finished with 65 N indentation performance foam, dark piping, and seam stitching at 8 stitches per 25 mm. Outer side panels place light upholstered insets within dark rails and posts. The 500 mm square table has a 35 mm dark wood veneer or engineered wood top and a matching lower shelf. Functionally, each chair offers a 620 mm wide enclosed seat, 540 mm clear width between armrests, 620 mm high continuous arms, and a fixed 100 degree lounge recline. Seat and back cushions can be lifted out for cleaning or reupholstery. The table is accessible from either chair, and its 260 mm high open shelf provides space for books or refreshment trays. The round side inserts are decorative ventilation-style features rather than adjustable components. Recommended load is 160 kg per chair and 30 kg on the tabletop. The set suits executive office reception areas, quiet hotel lounge corners, VIP waiting spaces, tea rooms, studies, senior living common areas, residential living rooms, covered balconies, clubs, and showroom waiting zones. In commercial projects, repeating the set creates orderly two-person conversation bays along circulation routes. Procurement teams should note the unbranded model LC-1S2-T500-NEUTRAL, the two-carton packaging, 40 minute reference assembly time, 450 mm seat height for senior living applications, and the need to specify the preferred upholstery surface. Delivery planning can use the stated carton volume and container loading reference.

Two-Seat Lounge Seating Set with Dark Wood Frame and Square Side Table Specifications

Suppliers and stock