纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	900 × 850 × 900 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total set net weight	58 kg
Recommended load per chair	160 kg
Recommended tabletop load	30 kg
Seating capacity	2 persons
Cushion foam density	35 kg/m3
Cushion foam indentation performance	65 N
Cushion cover seam pitch	8 stitches per 25 mm
Structural durability target	100000 seating cycles
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Chair structural frame	Dark-finish hardwood or engineered wood frame with 45 mm rails and exposed joinery
Back top rail	Stepped layered wood rail with rounded outer edge and dark brown finish
Seat supporting panel	20 mm board or webbed support platform beneath the loose cushion
Cushion core	High-resilience polyurethane foam with 120 mm seat thickness and 100 mm back thickness
Cushion upholstery	Off-white woven fabric or leather-look upholstery with dark edge piping
Outer side panels	Light upholstered inset panels enclosed by dark wood rails and posts
Side decorative detail	Round dark grille-style inset with two horizontal line details on each outer side panel
Side table frame	Four dark wood posts joined by square aprons and a matching lower shelf
Tabletop surface	35 mm dark wood veneer or engineered wood panel with inset border detailing
Fasteners and corner blocks	Steel screws, dowels, and 18 mm wooden corner blocks at rail joints
Foot protection	Nylon or felt floor glides on four chair legs and four table legs
Surface finish	Dark brown sealed wood finish with low-sheen appearance

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Single-person seating support	Each chair provides a 620 mm wide enclosed seat with fixed wood arms and upright back support
Removable cushion design	Seat and back cushions sit within the frame and can be lifted for cleaning or reupholstery
Fixed lounge recline angle	100 degrees
Arm support	620 mm high continuous rectangular arms support forearms and define each seating bay
Shared side table access	The 500 mm square table is centrally placed for use from either chair
Open lower shelf storage	260 mm high shelf compartment provides storage for books or refreshment trays
Decorative side ventilation-style detail	Round grille-style insert on each outer chair side adds a visual focal point without an adjustment function
Floor protection and leveling	Four glides per chair and four per table allow minor leveling while reducing floor abrasion
Cleaning access	Open 160 mm floor clearance permits sweeping and robotic vacuum access under the chair rails
Set arrangement flexibility	Chairs may face parallel, angled, or separated configurations while retaining the table between them
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Office reception area	Place the two chairs and central table in executive reception zones for short guest conversations and refreshment service
Hotel lobby lounge	Use in quiet hotel corners or VIP waiting areas where low-contrast upholstery and wood detailing are required
Tea room or study	Position beside a window or tea wall for two-person reading, tea service, or casual discussion
Senior living reception	Specify for assisted common areas needing 450 mm seat height and supportive fixed arms
Residential living room	Pair the chairs as a conversation group in a study, living room, or covered balcony
Club or showroom waiting zone	Repeat the set in multiples along circulation routes for orderly 2-person seating bays
Recommended matching furniture	Combine with a 1200 mm coffee table or 2-seat sofa from the same wood and upholstery finish
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Seating strength and durability	EN 16139 durability and safety requirements for non-domestic seating
Upholstered furniture safety	EN 1021cigarette and EN 1021 match ignition resistance tests
Formaldehyde panel emission	EN 13986 wood-based panel formaldehyde E1 classification
Surface furniture test	EN 15185 furniture surface resistance to dry heat and EN 12720 resistance to cold liquids

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.4

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Formaldehyde emission acceptance	GB/T 39600 artificial panel emission limit, E1 requirement
Wood furniture quality acceptance	GB/T 3324 general technical requirements for wooden furniture
Upholstered furniture safety	GB 17927 upholstered furniture safety requirements
Furniture mechanical test for seating	GB/T 10357 seating strength and stability test methods

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Formaldehyde emission acceptance：GB/T 39600 artificial panel emission limit, E1 requirement；
2. Wood furniture quality acceptance：GB/T 3324 general technical requirements for wooden furniture；
3. Upholstered furniture safety：GB 17927 upholstered furniture safety requirements；
4. Furniture mechanical test for seating：GB/T 10357 seating strength and stability test methods；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · LC-1S2-T500-NEUTRAL

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · LC-1S2-T500-NEUTRAL

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · LC-1S2-T500-NEUTRAL打开导出工具

页面快速操作

发布采购询价

产品描述

The Two-Seat Lounge Seating Set with Dark Wood Frame and Square Side Table presents a structured two-person seating arrangement with two single lounge chairs and a centrally positioned square table. Its visual character combines a dark brown wood framework with light off-white woven fabric or leather-look upholstery, dark edge piping, padded cushions, and exposed joinery. Each chair is enclosed by fixed rectangular wood arms and an upright back, while the stepped, rounded top rail and round grille-style outer side inserts provide refined decorative detail. The matching table uses four dark wood posts, square aprons, an inset-bordered top, and an open lower shelf that reinforce the set's orderly, low-contrast appearance. Construction centers on a dark-finish hardwood or engineered wood frame built with 45 mm rails. Beneath the loose seat cushion is a 20 mm board or webbed support platform. Cushion cores use high-resilience polyurethane foam, with a finished seat cushion thickness of 90 mm and backrest padding thickness of 70 mm. The back includes a defined lumbar support zone, and covers are finished with 65 N indentation performance foam, dark piping, and seam stitching at 8 stitches per 25 mm. Outer side panels place light upholstered insets within dark rails and posts. The 500 mm square table has a 35 mm dark wood veneer or engineered wood top and a matching lower shelf. Functionally, each chair offers a 620 mm wide enclosed seat, 540 mm clear width between armrests, 620 mm high continuous arms, and a fixed 100 degree lounge recline. Seat and back cushions can be lifted out for cleaning or reupholstery. The table is accessible from either chair, and its 260 mm high open shelf provides space for books or refreshment trays. The round side inserts are decorative ventilation-style features rather than adjustable components. Recommended load is 160 kg per chair and 30 kg on the tabletop. The set suits executive office reception areas, quiet hotel lounge corners, VIP waiting spaces, tea rooms, studies, senior living common areas, residential living rooms, covered balconies, clubs, and showroom waiting zones. In commercial projects, repeating the set creates orderly two-person conversation bays along circulation routes. Procurement teams should note the unbranded model LC-1S2-T500-NEUTRAL, the two-carton packaging, 40 minute reference assembly time, 450 mm seat height for senior living applications, and the need to specify the preferred upholstery surface. Delivery planning can use the stated carton volume and container loading reference.

Two-Seat Lounge Seating Set with Dark Wood Frame and Square Side Table Specifications

供应商与现货